Kitchen underfloor heating in Reigate

Why kitchen underfloor heating for a Reigate home?

Many Reigate kitchens lose their only radiator wall to a new run of units, and underfloor heating keeps the room warm without giving up storage.

Kitchen-diners across Surrey often have a large stretch of open floor, which can suit a wet system run from the existing boiler or heat pump. Homes right across Reigate are covered, as are nearby places such as Redhill, Horley and the villages in between.

What does the job involve?

Your written quote lists everything included. For kitchen underfloor heating, that normally means:

A new circuit or fused spur, plus a thermostat with a floor sensor
A survey of the subfloor, open floor area and existing heating system
A heating layout drawn to the kitchen plan, clear of units and appliances
Electric mats or cables, or wet pipework connected through a manifold
Screed, overlay boards or levelling compound, left to cure before finishes
Plinth heaters fitted under base units where wall space for a radiator is short

What does kitchen underfloor heating cost in Reigate?

As a starting point for Reigate, these ranges include VAT at 20% and allow for typical labour costs in the South East. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

What does kitchen underfloor heating cost in Reigate?
Typical project	Guide price
Electric underfloor heating, kitchen floorMat or cable system, insulation board and thermostat	£690–£1,700
Wet underfloor heating, kitchen floorPipes, manifold, screed or overlay boards	£1,700–£4,600
Plinth heater fitted under a base unitElectric or hydronic, where wall space is short	£290–£690

Guide prices cover the heating system, insulation boards, controls and connection with testing; the floor finish, subfloor repairs, a consumer unit upgrade and any boiler or heat pump changes are priced separately. Prices include VAT at 20%.

Kitchens in homes around Reigate

Typical homes in this part of Surrey include 1930s semis, Victorian and Edwardian villas, detached family houses and new-build estates. 1930s semis often have a narrow kitchen beside the dining room, while larger detached houses and Edwardian villas may have room for an island or a separate utility.

Private roads, long drives and village lanes can be awkward for large lorries, while town-centre flats may need lift bookings and parking permits for delivery day. Surrey's water is hard across most of the county, so limescale on taps and boiling water taps is common, and a scale-reducing filter is worth considering.

What rules apply to kitchen underfloor heating in Reigate?

In England, electric underfloor heating needs a supply and a thermostat. A new dedicated circuit is notifiable under Part P and is certified through a competent person scheme or building control, while a fused spur from an existing circuit is not notifiable in England but must still meet BS 7671 and be certified. A wet system is joined to your existing heating, and any work on a gas boiler is for a Gas Safe registered engineer.

Listed buildings and conservation areas in older towns and villages may need consent for new vents, and flats in managed blocks usually need the freeholder's consent first.

Planning ahead

Photograph the heating mats or pipes before the floor goes down, so you know where they run if you ever need to drill into it.
Ask for the finished floor height to be worked out before you order units for your Reigate kitchen, so plinths and appliances still fit.
If you have a heat pump or a newer boiler in Surrey, ask whether it can supply a wet floor zone or whether electric is simpler.
If the floor is small and there is no wall space for a radiator, a plinth heater under a base unit may be simpler.

Questions about kitchen underfloor heating in Reigate

How much does kitchen underfloor heating cost in Reigate?

Guide prices in Reigate are about £690 to £1,700 including VAT for electric underfloor heating for a kitchen floor. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover all of Reigate?

Yes. We work across Reigate, including the RH2 postcode district, and nearby towns such as Redhill and Horley. Book a free survey visit and we will arrange a time that suits you.

Is electric or wet underfloor heating better for a kitchen?

It depends on the floor and the heating you already have. Electric mats are thin, quick to lay and suit a single kitchen floor during a refit. Wet systems use warm water from the boiler or heat pump, need more floor depth and a manifold, and make more sense when a larger area, such as a whole kitchen-diner floor, is being relaid at the same time.

Which floor finishes work with underfloor heating?

Porcelain and ceramic tiles work well, because they conduct heat and cope with temperature changes. Luxury vinyl tiles and engineered wood can also be used, but their manufacturers set a maximum surface temperature, so the thermostat needs a floor sensor and a limit set to match. Thick underlays and rugs reduce the heat reaching the room, so check the finish's installation guidance before ordering.

Can underfloor heating go under kitchen units?

No, it is not usually laid under fitted units, plinths or appliances. Heat trapped beneath a cabinet or appliance can build up and damage the system or the floor, and it warms nothing useful. The heating layout follows the kitchen plan, covering the open floor, walkways and any dining area, which is why the units are set out before the heating goes down.

Nearby places we cover

Neighbouring towns where we offer kitchen underfloor heating: