Utility room fitting · Greater London
Utility room fitting in Purley
From the survey to handover, utility room fitting in Purley is run by us as one job, with the fitters and trades booked in the right order.
Why utility room fitting for a Purley home?
In a Purley house where the garage is already used for storage rather than the car, some people fit a run of units and the laundry along one wall.
When a new kitchen is being planned in Greater London, moving the laundry to a utility often makes room for deep drawers or a dishwasher in the kitchen itself. Kitchens in every part of Purley are covered, and the survey visit is free wherever you are in Greater London.
What does the job involve?
Here is what usually goes into utility room fitting, adjusted to your Purley kitchen after we have measured it:
- Washing machine supply, waste and isolation valve, tested for leaks
- Utility sink and tap plumbed in, with new supplies and waste where none exist
- Base, wall and tall units fitted, levelled and fixed to the wall
- Stacking kit fitted where the washer and dryer sit one above the other
- Free survey visit to check water, waste, power and outside wall positions
- A vent to outside for a vented dryer, or a drain hose for condenser models
How much does utility room fitting cost in Purley?
As a starting point for Purley, these ranges include VAT at 20% and allow for typical labour costs in London. Labour in London generally costs more than the UK average, which lifts these ranges a little.
| Typical project | Guide price |
|---|---|
| Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels | £1,600–£3,900 |
| Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections | £3,900–£9,100 |
| New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist | £520–£1,300 |
Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.
House types around Purley and what they mean for a kitchen
Across Greater London you will often find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, and each shapes the kitchen differently. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.
Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.
What rules apply to utility room fitting in Purley?
Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.
Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.
Before you book utility room fitting in Purley
- If the utility will be in the garage of your Purley home, make sure the space stays above freezing in winter for the pipes and machines.
- Ask for an isolation valve on the washing machine supply that can be reached without pulling the machine out from under the worktop.
- In a Purley flat, check with the freeholder before a new dryer vent or extract fan is cut through an outside wall.
- If there is no water or waste in the space, new plumbing has to reach it, which is simplest close to an existing kitchen or bathroom.
Questions about utility room fitting in Purley
How much does utility room fitting cost in Purley?
For fitting three to six utility units and a worktop you have bought, budget around £1,600 to £3,900 including VAT in Purley. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.
Can you measure up in Purley before quoting?
Yes. Every quote starts with a free, no-obligation survey visit to your home in Purley. We measure the room, check the walls, floor and service positions, then send an itemised written quote.
Can a worktop go over a washing machine and dryer?
Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.
Does a condenser or heat pump dryer need an outside vent?
No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.
Does a utility room need an extractor fan?
Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.
Nearby places we cover
The same service is available a short drive from Purley, including:
- Utility room fitting in Coulsdon
- Utility room fitting in South Croydon
- Utility room fitting in Wallington
- Utility room fitting in Carshalton
- Utility room fitting in Croydon
- Utility room fitting in Sutton
- Utility room fitting across Greater London