Utility room fitting in Croydon

Is utility room fitting right for your Croydon kitchen?

Larger households in Croydon sharing a lot of laundry often want a stacked washer and dryer, a hanging rail and a clear worktop for folding.

Landlords letting larger family homes across Greater London sometimes add a utility so tenants have room for laundry, coats and cleaning kit without filling the kitchen with appliances. We cover all of Croydon, including the CR0 and CR7 postcode districts, and travel out to neighbouring towns across Greater London.

What does utility room fitting in Croydon include?

Here is what usually goes into utility room fitting, adjusted to your Croydon kitchen after we have measured it:

Base, wall and tall units fitted, levelled and fixed to the wall
Extract fan fitted to clear moisture from washing and drying
Stacking kit fitted where the washer and dryer sit one above the other
A vent to outside for a vented dryer, or a drain hose for condenser models
Worktop over the washing machine and dryer, supported clear of the appliances
Washing machine supply, waste and isolation valve, tested for leaks

Utility room fitting prices in Croydon

These guide ranges include VAT at 20% and are adjusted for prices in London. We confirm your price in writing after a free survey visit. Labour in London generally costs more than the UK average, which lifts these ranges a little.

Utility room fitting prices in Croydon
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,600–£3,900
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£3,900–£9,100
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£520–£1,300

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

Kitchens in homes around Croydon

In and around Croydon, homes range across Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Do you need approval for utility room fitting in Croydon?

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Before you book utility room fitting in Croydon

Leave room behind the washing machine for the hoses; pushing it hard against the wall can kink them and stop the water draining properly.
Measure the washer and dryer heights, including any stacking kit, before ordering wall units or shelves to go above them.
In a Croydon flat, check with the freeholder before a new dryer vent or extract fan is cut through an outside wall.
A worktop over appliances needs support at each side and a gap above the machines, so they can be slid out for servicing.

Questions about utility room fitting in Croydon

How much does utility room fitting cost in Croydon?

For fitting three to six utility units and a worktop you have bought, budget around £1,600 to £3,900 including VAT in Croydon. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.

Which parts of Croydon do you work in?

All of them. Our Greater London coverage takes in the whole of Croydon, including the CR0 and CR7 postcode districts, as well as surrounding towns such as South Croydon. If you are unsure, send us your postcode.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Nearby places we cover

The same service is available a short drive from Croydon, including: