Utility room fitting in Petersfield

Who usually needs utility room fitting in Petersfield?

Families in Petersfield often want the washing machine out of the kitchen, so the noise, the wet laundry and the drying racks have a room of their own.

If your Petersfield home has a back lobby or a rear porch with a little spare width, a few units and a stacked washer and dryer can make it a working utility. We work throughout Petersfield (GU31) and across the wider Hampshire area.

What does the job involve?

The exact scope is agreed after the survey, but a typical job in Petersfield covers:

Base, wall and tall units fitted, levelled and fixed to the wall
Worktop over the washing machine and dryer, supported clear of the appliances
A vent to outside for a vented dryer, or a drain hose for condenser models
Stacking kit fitted where the washer and dryer sit one above the other
Washing machine supply, waste and isolation valve, tested for leaks
Free survey visit to check water, waste, power and outside wall positions

Utility room fitting prices in Petersfield

As a starting point for Petersfield, these ranges include VAT at 20% and allow for typical labour costs in the South East. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

Utility room fitting prices in Petersfield
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,400–£3,400
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£3,400–£8,000
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£460–£1,200

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

House types around Petersfield and what they mean for a kitchen

Typical homes in this part of Hampshire include Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help. Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle.

Regulations for kitchen work in Petersfield

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Before you book utility room fitting in Petersfield

If the utility will be in the garage of your Petersfield home, make sure the space stays above freezing in winter for the pipes and machines.
Before choosing a dryer for your Petersfield utility, check whether there is an outside wall close enough for a short, straight vent duct.
Ask for an isolation valve on the washing machine supply that can be reached without pulling the machine out from under the worktop.
Under-stairs spaces can take a washer and dryer, but check the headroom, the ventilation and room to pull machines out before committing.

Questions about utility room fitting in Petersfield

How much does utility room fitting cost in Petersfield?

Guide prices in Petersfield are about £1,400 to £3,400 including VAT for fitting three to six utility units and a worktop you have bought. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Can you measure up in Petersfield before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Petersfield. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Also covering nearby towns

Neighbouring towns where we offer utility room fitting: