Utility room fitting · England
Utility room fitting in Merseyside
We carry out utility room fitting across Merseyside, from Liverpool to the smaller towns, with a free survey visit and an itemised written quote as standard.
When does utility room fitting make sense in Merseyside?
If your Merseyside home has a back lobby or a rear porch with a little spare width, a few units and a stacked washer and dryer can make it a working utility.
Landlords letting larger family homes across Merseyside sometimes add a utility so tenants have room for laundry, coats and cleaning kit without filling the kitchen with appliances.
What does utility room fitting in Merseyside include?
Your written quote lists everything included. For utility room fitting, that normally means:
- Free survey visit to check water, waste, power and outside wall positions
- Base, wall and tall units fitted, levelled and fixed to the wall
- Worktop over the washing machine and dryer, supported clear of the appliances
- Washing machine supply, waste and isolation valve, tested for leaks
- A vent to outside for a vented dryer, or a drain hose for condenser models
- Stacking kit fitted where the washer and dryer sit one above the other
- Utility sink and tap plumbed in, with new supplies and waste where none exist
- Extract fan fitted to clear moisture from washing and drying
How much does utility room fitting cost in Merseyside?
The figures below are guide prices for Merseyside, including VAT and adjusted for typical costs across the North West. The fixed price comes after we have measured up. Costs across the North West tend to sit under UK averages, which these ranges reflect.
| Typical project | Guide price |
|---|---|
| Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels | £1,100–£2,800 |
| Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections | £2,800–£6,600 |
| New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist | £380–£950 |
Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.
Kitchens in homes across Merseyside
Across Merseyside you will often find Victorian terraces, Victorian and Edwardian villas, 1930s semis and converted warehouse flats, and each shapes the kitchen differently. Two-up two-down terraces often have a small back kitchen off the living room, while 1930s semis tend to have a separate kitchen with space to open into a dining room.
Merseyside's mains water is soft, so limescale is rarely a big issue and taps, sinks and boiling water taps stay cleaner for longer. Terraced streets with back entries, city-centre flats with booked lifts and permit parking zones can all affect how and when a kitchen is delivered.
Knocking a small back kitchen through to the living room is a common way to make space for a table in a terrace. Large Victorian villas split into flats often mean fitting a full kitchen into one room, with shared services and stair access to plan around.
Rules for utility room fitting in Merseyside
Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.
Conservation areas and listed buildings are common in older parts of Liverpool and the Wirral, so a new vent on a visible wall may need consent.
Before you start
- A utility in a garage needs to be dry, lit and kept above freezing already; converting the garage itself is a separate building job.
- Stacking the dryer on the washing machine saves width, but it needs a stacking kit that suits both machines and enough height for the pair.
- Under-stairs spaces can take a washer and dryer, but check the headroom, the ventilation and room to pull machines out before committing.
- A worktop over appliances needs support at each side and a gap above the machines, so they can be slid out for servicing.
- Leave room behind the washing machine for the hoses; pushing it hard against the wall can kink them and stop the water draining properly.
- Plan the sockets in your Merseyside utility so each appliance can be switched off at an accessible switch without moving the machine.
Questions about utility room fitting in Merseyside
How much does utility room fitting cost in Merseyside?
Utility room fitting in Merseyside typically costs £1,100 to £2,800 including VAT for fitting three to six utility units and a worktop you have bought, based on prices in the North West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover the whole of Merseyside?
Yes. We carry out utility room fitting across Merseyside, including Liverpool, Birkenhead, St Helens and Southport. Every job starts with a free survey visit and an itemised written quote.
Does a utility room need an extractor fan?
Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.
Can a worktop go over a washing machine and dryer?
Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.
Can a utility room go in a garage or under the stairs?
Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.
Utility room fitting in towns across Merseyside
Choose a town for local guide prices and postcode coverage:
- Utility room fitting in Liverpool
- Utility room fitting in Birkenhead
- Utility room fitting in St Helens
- Utility room fitting in Southport
- Utility room fitting in Wallasey
- Utility room fitting in Bootle
- Utility room fitting in Bebington
- Utility room fitting in Huyton
- Utility room fitting in Kirkby
- Utility room fitting in Prescot
- Utility room fitting in Heswall
- Utility room fitting in Maghull
- Utility room fitting in Newton-le-Willows
- Utility room fitting in Formby
- Utility room fitting in Litherland
- Utility room fitting in Speke
- Utility room fitting in Garston
- Utility room fitting in Halewood
- Utility room fitting in Kirkdale