Utility room fitting · Northern Ireland
Utility room fitting in County Armagh
Homeowners and landlords across County Armagh can book us for utility room fitting: utility rooms fitted with units, a sink, washer and dryer connections and a worktop over the appliances.
Thinking about utility room fitting in County Armagh?
Landlords letting larger family homes across County Armagh sometimes add a utility so tenants have room for laundry, coats and cleaning kit without filling the kitchen with appliances.
When a new kitchen is being planned in County Armagh, moving the laundry to a utility often makes room for deep drawers or a dishwasher in the kitchen itself.
What does utility room fitting in County Armagh include?
Here is what usually goes into utility room fitting, adjusted to your County Armagh kitchen after we have measured it:
- Free survey visit to check water, waste, power and outside wall positions
- Base, wall and tall units fitted, levelled and fixed to the wall
- Worktop over the washing machine and dryer, supported clear of the appliances
- Washing machine supply, waste and isolation valve, tested for leaks
- A vent to outside for a vented dryer, or a drain hose for condenser models
- Stacking kit fitted where the washer and dryer sit one above the other
- Utility sink and tap plumbed in, with new supplies and waste where none exist
- Extract fan fitted to clear moisture from washing and drying
How much does utility room fitting cost in County Armagh?
Use these ranges to plan your budget. They include VAT, reflect costs in Northern Ireland, and are firmed up once we have seen your County Armagh kitchen. Costs across Northern Ireland tend to sit under UK averages, which these ranges reflect.
| Typical project | Guide price |
|---|---|
| Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels | £1,100–£2,600 |
| Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections | £2,600–£6,200 |
| New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist | £350–£880 |
Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.
Kitchens in homes across County Armagh
The housing mix across County Armagh includes Georgian townhouses, red-brick terraces, new town houses and rural bungalows, so no two kitchen fits are quite alike. Georgian houses in Armagh often have kitchens in former back rooms, while new-town houses in Craigavon and rural bungalows tend to have compact rectangular kitchens.
Hardness in County Armagh depends on the source, from soft to moderately hard, so check with your water supplier before choosing a filter. Country lanes and farm entrances can be tight for delivery lorries, and older terraced streets may have limited parking, so delivery is planned ahead.
Rural bungalow refits are common, often adding a utility room for boots and laundry, more storage and an open kitchen-dining area. Terraces and Georgian town houses tend to have smaller kitchens, where careful planning around period features, chimney breasts and uneven walls matters.
Rules for utility room fitting in County Armagh
In Northern Ireland, fitting a utility room in an existing space needs no planning permission or building control application. There is no notification scheme for domestic electrical work, but sockets and any new circuit should be installed and tested to BS 7671 and certified. New drainage connections go to council building control, Technical Booklet K covers ventilation, and a Gas Safe registered engineer should spillage-test any open-flued boiler after an extract fan is fitted.
Armagh's Georgian centre is a conservation area with many listed buildings, so new external vents or changes to historic features there may need consent first.
Before you start
- A worktop over appliances needs support at each side and a gap above the machines, so they can be slid out for servicing.
- A utility in a garage needs to be dry, lit and kept above freezing already; converting the garage itself is a separate building job.
- Stacking the dryer on the washing machine saves width, but it needs a stacking kit that suits both machines and enough height for the pair.
- If there is no water or waste in the space, new plumbing has to reach it, which is simplest close to an existing kitchen or bathroom.
- Ask for an isolation valve on the washing machine supply that can be reached without pulling the machine out from under the worktop.
- Before choosing a dryer for your County Armagh utility, check whether there is an outside wall close enough for a short, straight vent duct.
Questions about utility room fitting in County Armagh
How much does utility room fitting cost in County Armagh?
Guide prices in County Armagh are about £1,100 to £2,600 including VAT for fitting three to six utility units and a worktop you have bought. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you cover the whole of County Armagh?
Yes. We carry out utility room fitting across County Armagh, including Craigavon, Portadown and Armagh. Every job starts with a free survey visit and an itemised written quote.
Can a worktop go over a washing machine and dryer?
Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.
Does a condenser or heat pump dryer need an outside vent?
No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.
Does a utility room need an extractor fan?
Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.
Utility room fitting in towns across County Armagh
Choose a town for local guide prices and postcode coverage: