Kitchen Installers UK

Utility room fitting · County Down

Utility room fitting in Newry

From the survey to handover, utility room fitting in Newry is run by us as one job, with the fitters and trades booked in the right order.

Guide price£350 to £6,200
Postcodes includeBT34 and BT35
Timescale1 to 3 days on site
A utility room with a stacked washing machine and dryer, a small sink, a tall cupboard and a laminate worktop

Why utility room fitting for a Newry home?

Landlords letting larger family homes across County Down sometimes add a utility so tenants have room for laundry, coats and cleaning kit without filling the kitchen with appliances.

In a Newry house where the garage is already used for storage rather than the car, some people fit a run of units and the laundry along one wall. If your home is in Newry or close by in Banbridge or Portadown, the same survey, quote and fitting process applies.

What we cover for utility room fitting in Newry

The exact scope is agreed after the survey, but a typical job in Newry covers:

  • Free survey visit to check water, waste, power and outside wall positions
  • Washing machine supply, waste and isolation valve, tested for leaks
  • A vent to outside for a vented dryer, or a drain hose for condenser models
  • Worktop over the washing machine and dryer, supported clear of the appliances
  • Stacking kit fitted where the washer and dryer sit one above the other
  • Extract fan fitted to clear moisture from washing and drying

How much does utility room fitting cost in Newry?

As a starting point for Newry, these ranges include VAT at 20% and allow for typical labour costs in Northern Ireland. Labour rates in Northern Ireland are generally lower than in London and the South East, so these ranges are a little below the national guide.

How much does utility room fitting cost in Newry?
Typical projectGuide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels£1,100–£2,600
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections£2,600–£6,200
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist£350–£880

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

What kind of kitchens do we fit in Newry?

In and around Newry, homes range across Victorian seaside villas, red-brick terraces, rural bungalows and new-build estates. Victorian villas in the seaside towns often have a separate kitchen and old scullery, while newer estate houses tend to have an open-plan kitchen-diner.

Most of County Down has soft mains water, so limescale is less of a concern and taps, sinks and boiling water taps stay cleaner. Country lanes in the Mournes and on the Ards Peninsula can be narrow for lorries, and seaside flats may have no lift, so access is checked early.

Regulations for kitchen work in Newry

In Northern Ireland, fitting a utility room in an existing space needs no planning permission or building control application. There is no notification scheme for domestic electrical work, but sockets and any new circuit should be installed and tested to BS 7671 and certified. New drainage connections go to council building control, Technical Booklet K covers ventilation, and a Gas Safe registered engineer should spillage-test any open-flued boiler after an extract fan is fitted.

Many older towns and villages in County Down have conservation areas or listed buildings, where a new external vent or changes to historic features may need consent.

Tips before you start

  • In a Newry flat, check with the freeholder before a new dryer vent or extract fan is cut through an outside wall.
  • Plan the sockets in your Newry utility so each appliance can be switched off at an accessible switch without moving the machine.
  • If the utility will be in the garage of your Newry home, make sure the space stays above freezing in winter for the pipes and machines.
  • A worktop over appliances needs support at each side and a gap above the machines, so they can be slid out for servicing.

Questions about utility room fitting in Newry

How much does utility room fitting cost in Newry?

For fitting three to six utility units and a worktop you have bought, budget around £1,100 to £2,600 including VAT in Newry. That reflects typical costs in Northern Ireland; we confirm the actual figure in writing once we have measured up.

Do you cover all of Newry?

Yes. We work across Newry, including the BT34 and BT35 postcode districts, and nearby towns such as Banbridge and Portadown. Book a free survey visit and we will arrange a time that suits you.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Utility room fitting near Newry

Neighbouring towns where we offer utility room fitting:

Other kitchen work in Newry

Free survey visit

Book a free survey visit in Newry

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price