Utility room fitting in Bodmin

Why utility room fitting for a Bodmin home?

If the kitchen in your Cornwall home is a narrow galley, a separate utility can take the appliances that would otherwise crowd the worktop and storage.

Landlords letting larger family homes across Cornwall sometimes add a utility so tenants have room for laundry, coats and cleaning kit without filling the kitchen with appliances. Kitchens in every part of Bodmin are covered, and the survey visit is free wherever you are in Cornwall.

What is in a typical job?

Here is what usually goes into utility room fitting, adjusted to your Bodmin kitchen after we have measured it:

Base, wall and tall units fitted, levelled and fixed to the wall
Stacking kit fitted where the washer and dryer sit one above the other
Utility sink and tap plumbed in, with new supplies and waste where none exist
Worktop over the washing machine and dryer, supported clear of the appliances
Free survey visit to check water, waste, power and outside wall positions
A vent to outside for a vented dryer, or a drain hose for condenser models

Utility room fitting prices in Bodmin

The figures below are guide prices for Bodmin, including VAT and adjusted for typical costs across the South West. The fixed price comes after we have measured up. Prices across the South West are broadly in line with UK averages.

Utility room fitting prices in Bodmin
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,200–£3,100
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£3,100–£7,200
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£410–£1,000

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

Kitchens in homes around Bodmin

In and around Bodmin, homes range across granite and slate cottages, Victorian terraces, post-war bungalows and converted barns. Older stone cottages often have a small, low-ceilinged kitchen with uneven walls, while post-war bungalows tend to have a square kitchen beside a separate dining area.

Mains water across most of Cornwall is soft, which is kinder to taps and appliances, so heavy limescale build-up is rarely a problem. Narrow lanes, steep harbour streets and cottages with no parking outside can make delivering long worktops tricky, so delivery day needs planning in advance.

Do you need approval for utility room fitting in Bodmin?

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Where a cottage is listed or sits in one of the many harbour-town conservation areas, consent may be needed before a new extractor vent is cut through an outside wall.

Worth knowing before the fit

In a Bodmin flat, check with the freeholder before a new dryer vent or extract fan is cut through an outside wall.
Before choosing a dryer for your Bodmin utility, check whether there is an outside wall close enough for a short, straight vent duct.
If your Cornwall home has an open-flued boiler in the utility, ask for a spillage test by a Gas Safe registered engineer once an extract fan goes in.
A utility in a garage needs to be dry, lit and kept above freezing already; converting the garage itself is a separate building job.

Questions about utility room fitting in Bodmin

How much does utility room fitting cost in Bodmin?

Utility room fitting in Bodmin typically costs £1,200 to £3,100 including VAT for fitting three to six utility units and a worktop you have bought, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Bodmin as well?

Yes. As well as Bodmin itself, we cover the rest of Cornwall and nearby towns such as St Austell and Liskeard. The process is the same wherever the kitchen is.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Utility room fitting in neighbouring towns

We also carry out utility room fitting in these towns near Bodmin: