Replacement kitchen doors · Scotland
Replacement kitchen doors in Forth Valley
If you need replacement kitchen doors anywhere in Forth Valley, we survey the kitchen, agree the scope with you and book every trade through to handover.
Why replacement kitchen doors for a Forth Valley home?
If you have bought a Forth Valley home where the kitchen layout works but the colour does not, new doors and handles can change the look in a day or two.
Some Forth Valley households getting ready to sell want the kitchen to look fresher in the photographs without the cost and mess of taking it out.
What do replacement kitchen doors in Forth Valley include?
The exact scope is agreed after the survey, but a typical job in Forth Valley covers:
- Free survey visit to check the carcasses and measure every door and drawer front
- Doors and drawer fronts made to measure or matched to the existing sizes
- Hinge holes drilled to line up with the positions on your carcasses
- New soft-close hinges fitted and every door adjusted so the gaps run even
- Drawer fronts fixed to existing drawer boxes, or new boxes where worn
- Handles or knobs drilled from a template so they sit at a consistent height
- Matching end panels, plinths, cornice and pelmet cut and fitted
- New fronts fixed to integrated appliances with their door-fixing kits
How much do replacement kitchen doors cost in Forth Valley?
The figures below are guide prices for Forth Valley, including VAT and adjusted for typical costs across Scotland. The fixed price comes after we have measured up. Prices in Scotland usually come in below the national guide, as labour rates are lower than in the South East.
| Typical project | Guide price |
|---|---|
| Doors and drawer fronts supplied and fitted (15–20 doors)Standard ranges, with new hinges and handles | £940–£2,800 |
| Bespoke, in-frame or hand-painted doorsMade to measure for your carcasses | £1,900–£4,700 |
| Fitting only, doors you have boughtHanging, adjusting, handles drilled and fitted | £280–£750 |
| Matching end panels, plinths and corniceCut and fitted to suit the new doors | £140–£560 |
Guide ranges cover doors, drawer fronts, hinges and handles for a typical kitchen of 15 to 20 doors; replacing swollen carcasses, worktops or appliances is priced separately. Prices include VAT at 20%.
Kitchens in homes across Forth Valley
You will find sandstone tenement flats, Victorian villas, post-war council-built houses and new-build estates throughout Forth Valley. Tenement flats in Stirling and Falkirk often have a small kitchen off the hall, while post-war houses and new-builds tend to have compact rectangular rooms.
Expect soft mains water across Forth Valley, which means little limescale on taps, sinks and boiling water taps. Stirling's older streets can be steep with limited parking, and rural roads towards the Trossachs are narrow, so delivery vehicle size and timing are planned ahead.
Victorian villa kitchens often sit in a former scullery, and opening one into the dining room needs a building warrant if the wall is load-bearing. Ex-council houses frequently need a full strip-out with new electrics, plumbing, more storage and an asbestos check on older floor tiles before work starts.
Rules for replacement kitchen doors in Forth Valley
In Scotland, replacing kitchen doors and drawer fronts counts as replacing fitments, which does not need a building warrant. A listed building may need listed building consent if original fitted joinery is being altered or removed. If plinth or cornice lighting is added at the same time, the wiring must meet the building standards and BS 7671, so ask for the right electrical certificate. Nothing else about a door change involves building standards.
Parts of the Stirling area lie within Loch Lomond and The Trossachs National Park, and listed buildings in older town centres may need consent for new vents.
Before you start
- If the worktops are also worn, consider replacing them in the same visit rather than fitting new doors beside tired surfaces.
- A new kitchen makes more sense if the carcasses are damaged, the layout does not work, or the sink and hob need to move.
- Remember the extras: end panels, plinths, cornice, pelmet and integrated appliance doors all need to match the new fronts.
- Door sizes and hinge positions vary between makers, so doors must be made to measure or matched carefully to your existing units.
- Count every door, drawer front, end panel and plinth before asking for prices, including integrated appliance doors and panels at the ends of runs.
- Keep one old door until the new ones are fitted, so sizes and hinge positions can be checked if anything does not line up.
Questions about replacement kitchen doors in Forth Valley
How much do replacement kitchen doors cost in Forth Valley?
For 15 to 20 doors and drawer fronts, supplied and fitted, budget around £940 to £2,800 including VAT in Forth Valley. That reflects typical costs in Scotland; we confirm the actual figure in writing once we have measured up.
Do you cover the whole of Forth Valley?
Yes. We carry out replacement kitchen doors across Forth Valley, including Stirling, Falkirk, Alloa and Grangemouth. Every job starts with a free survey visit and an itemised written quote.
When does a new kitchen make more sense than new doors?
When the problem is more than the look. If several carcasses are swollen or broken, the layout does not work for you, or you want to move the sink, hob or appliances, new doors only cover the issue. New doors suit kitchens whose cabinets are square, dry and well fixed and whose layout still works. We will tell you at the survey which route we think makes sense.
Are new hinges and handles fitted with the doors?
Yes, normally. Old hinges are often worn or set for the old doors, so new soft-close hinges are fitted and adjusted so the doors close quietly and the gaps run even. Handles are drilled from a template so every one sits at the same height and distance from the edge. If you would like to reuse your existing handles, the new doors are drilled to suit them.
Can I change to a completely different door style?
Usually, yes. Slab, shaker and painted doors can all go on standard carcasses if the sizes and hinge positions suit. An in-frame look is more involved, because the doors sit inside a frame built onto the front of the units, so it costs more. A true handleless kitchen uses rails built into the carcasses, so with a door change that look is imitated with edge-profiled doors instead.
Replacement kitchen doors in towns across Forth Valley
Choose a town for local guide prices and postcode coverage:
- Replacement kitchen doors in Stirling
- Replacement kitchen doors in Falkirk
- Replacement kitchen doors in Alloa
- Replacement kitchen doors in Grangemouth