Replacement kitchen doors · Scotland
Replacement kitchen doors in Glasgow
Our replacement kitchen doors work covers the whole of Glasgow, and we also work in neighbouring Dunbartonshire and Renfrewshire and Inverclyde.
What prompts replacement kitchen doors in Glasgow?
If your Glasgow kitchen is older, its cabinets may be in sizes that are no longer standard, so made-to-measure doors let you keep units that are still sound.
When one door in a Glasgow kitchen is broken and the range is no longer made, a full set of new matching doors is often the neatest answer.
What do replacement kitchen doors in Glasgow include?
Your written quote lists everything included. For replacement kitchen doors, that normally means:
- Free survey visit to check the carcasses and measure every door and drawer front
- Doors and drawer fronts made to measure or matched to the existing sizes
- Hinge holes drilled to line up with the positions on your carcasses
- New soft-close hinges fitted and every door adjusted so the gaps run even
- Drawer fronts fixed to existing drawer boxes, or new boxes where worn
- Handles or knobs drilled from a template so they sit at a consistent height
- Matching end panels, plinths, cornice and pelmet cut and fitted
- New fronts fixed to integrated appliances with their door-fixing kits
How much do replacement kitchen doors cost in Glasgow?
These guide ranges include VAT at 20% and are adjusted for prices in Edinburgh and Glasgow. We confirm your price in writing after a free survey visit. For Edinburgh and Glasgow, these ranges are close to the national figures.
| Typical project | Guide price |
|---|---|
| Doors and drawer fronts supplied and fitted (15–20 doors)Standard ranges, with new hinges and handles | £1,000–£3,100 |
| Bespoke, in-frame or hand-painted doorsMade to measure for your carcasses | £2,000–£5,100 |
| Fitting only, doors you have boughtHanging, adjusting, handles drilled and fitted | £310–£820 |
| Matching end panels, plinths and corniceCut and fitted to suit the new doors | £150–£610 |
Guide ranges cover doors, drawer fronts, hinges and handles for a typical kitchen of 15 to 20 doors; replacing swollen carcasses, worktops or appliances is priced separately. Prices include VAT at 20%.
Kitchens in homes across Glasgow
The housing mix across Glasgow includes sandstone tenement flats, Victorian terraces and villas, four-in-a-block flats and post-war high-rise flats, so no two kitchen fits are quite alike. Tenement flats often have a kitchen off the hall, sometimes with an old bed recess, while four-in-a-block flats tend to have a narrow galley at the back.
Glasgow's mains water is soft, much of it from Loch Katrine, so limescale is rarely a problem and taps and boiling water taps stay cleaner. Tenement closes and common stairs mean carrying units by hand, often to upper floors, and permit parking near the door may need arranging for delivery day.
Tenement kitchens often have high ceilings and a former bed recess, which can take tall units, a fridge freezer or a small dining nook. Four-in-a-block flats and ex-council houses more often need a full refit with new wiring, better storage and a more practical layout.
Rules for replacement kitchen doors in Glasgow
In Scotland, replacing kitchen doors and drawer fronts counts as replacing fitments, which does not need a building warrant. A listed building may need listed building consent if original fitted joinery is being altered or removed. If plinth or cornice lighting is added at the same time, the wiring must meet the building standards and BS 7671, so ask for the right electrical certificate. Nothing else about a door change involves building standards.
Many of the city's tenement streets, including much of the West End, are conservation areas, so a new external vent may need consent, and common walls involve neighbours.
Before you start
- Door sizes and hinge positions vary between makers, so doors must be made to measure or matched carefully to your existing units.
- Check the carcasses first; a swollen sink base, a sagging shelf or loose hinge plates mean some units may need replacing before new doors.
- Remember the extras: end panels, plinths, cornice, pelmet and integrated appliance doors all need to match the new fronts.
- Old drawer boxes may not take new fronts neatly; worn runners or unusual fixings sometimes make new drawer boxes worth adding.
- Keep one old door until the new ones are fitted, so sizes and hinge positions can be checked if anything does not line up.
- If the hob or sink in your Glasgow kitchen needs to move, plan a fuller refit rather than new doors on a layout that does not work.
Questions about replacement kitchen doors in Glasgow
How much do replacement kitchen doors cost in Glasgow?
Guide prices in Glasgow are about £1,000 to £3,100 including VAT for 15 to 20 doors and drawer fronts, supplied and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you cover the whole of Glasgow?
Yes. We carry out replacement kitchen doors across Glasgow. Every job starts with a free survey visit and an itemised written quote.
When does a new kitchen make more sense than new doors?
When the problem is more than the look. If several carcasses are swollen or broken, the layout does not work for you, or you want to move the sink, hob or appliances, new doors only cover the issue. New doors suit kitchens whose cabinets are square, dry and well fixed and whose layout still works. We will tell you at the survey which route we think makes sense.
Can new doors be fitted to my existing kitchen units?
Usually, yes, as long as the carcasses are sound. We measure every door and drawer front at the survey and check the hinge positions, because sizes vary between makers and older kitchens often use sizes that are no longer standard. Doors are then made to measure or matched to your units, drilled for new hinges and hung so the gaps line up across each run.
Are new hinges and handles fitted with the doors?
Yes, normally. Old hinges are often worn or set for the old doors, so new soft-close hinges are fitted and adjusted so the doors close quietly and the gaps run even. Handles are drilled from a template so every one sits at the same height and distance from the edge. If you would like to reuse your existing handles, the new doors are drilled to suit them.