Replacement kitchen doors · Scotland
Replacement kitchen doors in Perth and Kinross
We carry out replacement kitchen doors across Perth and Kinross, from Perth to the smaller towns, with a free survey visit and an itemised written quote as standard.
When do replacement kitchen doors make sense in Perth and Kinross?
When one door in a Perth and Kinross kitchen is broken and the range is no longer made, a full set of new matching doors is often the neatest answer.
If you have bought a Perth and Kinross home where the kitchen layout works but the colour does not, new doors and handles can change the look in a day or two.
What do replacement kitchen doors in Perth and Kinross include?
Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:
- Free survey visit to check the carcasses and measure every door and drawer front
- Doors and drawer fronts made to measure or matched to the existing sizes
- Hinge holes drilled to line up with the positions on your carcasses
- New soft-close hinges fitted and every door adjusted so the gaps run even
- Drawer fronts fixed to existing drawer boxes, or new boxes where worn
- Handles or knobs drilled from a template so they sit at a consistent height
- Matching end panels, plinths, cornice and pelmet cut and fitted
- New fronts fixed to integrated appliances with their door-fixing kits
How much do replacement kitchen doors cost in Perth and Kinross?
These guide ranges include VAT at 20% and are adjusted for prices in Scotland. We confirm your price in writing after a free survey visit. Labour rates in Scotland are generally lower than in London and the South East, so these ranges are a little below the national guide.
| Typical project | Guide price |
|---|---|
| Doors and drawer fronts supplied and fitted (15–20 doors)Standard ranges, with new hinges and handles | £940–£2,800 |
| Bespoke, in-frame or hand-painted doorsMade to measure for your carcasses | £1,900–£4,700 |
| Fitting only, doors you have boughtHanging, adjusting, handles drilled and fitted | £280–£750 |
| Matching end panels, plinths and corniceCut and fitted to suit the new doors | £140–£560 |
Guide ranges cover doors, drawer fronts, hinges and handles for a typical kitchen of 15 to 20 doors; replacing swollen carcasses, worktops or appliances is priced separately. Prices include VAT at 20%.
Kitchens in homes across Perth and Kinross
You will find sandstone tenement flats, Victorian villas, stone cottages and post-war council-built houses throughout Perth and Kinross. Victorian villas in Perth and Crieff often have a separate kitchen and former scullery, while tenement flats tend to have a small kitchen off the hall.
Mains water across Perth and Kinross is soft, though some remote homes rely on private supplies that may need testing and filtering. Highland Perthshire roads can be narrow and winding, and older town streets may have limited parking, so delivery vehicle size and timing are planned ahead.
Joining a villa kitchen and old scullery into one room is a common project, with a building warrant needed if a load-bearing wall is involved. Rural cottages are often off the gas grid and suit induction cooking or an oil-fired range.
Rules for replacement kitchen doors in Perth and Kinross
In Scotland, replacing kitchen doors and drawer fronts counts as replacing fitments, which does not need a building warrant. A listed building may need listed building consent if original fitted joinery is being altered or removed. If plinth or cornice lighting is added at the same time, the wiring must meet the building standards and BS 7671, so ask for the right electrical certificate. Nothing else about a door change involves building standards.
Parts of highland Perthshire lie within the Cairngorms or Loch Lomond and The Trossachs national parks, and listed buildings elsewhere may need consent for new vents.
Before you start
- Remember the extras: end panels, plinths, cornice, pelmet and integrated appliance doors all need to match the new fronts.
- A new kitchen makes more sense if the carcasses are damaged, the layout does not work, or the sink and hob need to move.
- Check the carcasses first; a swollen sink base, a sagging shelf or loose hinge plates mean some units may need replacing before new doors.
- Door sizes and hinge positions vary between makers, so doors must be made to measure or matched carefully to your existing units.
- Allow for delivery time on made-to-measure doors; your kitchen stays usable while you wait, as nothing comes off until they arrive.
- Choose handles after the doors, holding samples against the new colour in your Perth and Kinross kitchen's daylight before anything is drilled.
Questions about replacement kitchen doors in Perth and Kinross
How much do replacement kitchen doors cost in Perth and Kinross?
Replacement kitchen doors in Perth and Kinross typically cost £940 to £2,800 including VAT for 15 to 20 doors and drawer fronts, supplied and fitted, based on prices in Scotland. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover the whole of Perth and Kinross?
Yes. We carry out replacement kitchen doors across Perth and Kinross, including Perth and Crieff. Every job starts with a free survey visit and an itemised written quote.
When does a new kitchen make more sense than new doors?
When the problem is more than the look. If several carcasses are swollen or broken, the layout does not work for you, or you want to move the sink, hob or appliances, new doors only cover the issue. New doors suit kitchens whose cabinets are square, dry and well fixed and whose layout still works. We will tell you at the survey which route we think makes sense.
What if some of my kitchen units are water damaged?
Damaged units are replaced before the new doors go on, because swollen chipboard does not recover. The sink base is the usual problem, from slow leaks at the trap or tap, followed by units beside the dishwasher. We check every carcass at the survey, look for the cause of any leak, and price replacement units as a separate line so you can see the cost clearly.
Can I change to a completely different door style?
Usually, yes. Slab, shaker and painted doors can all go on standard carcasses if the sizes and hinge positions suit. An in-frame look is more involved, because the doors sit inside a frame built onto the front of the units, so it costs more. A true handleless kitchen uses rails built into the carcasses, so with a door change that look is imitated with edge-profiled doors instead.
Replacement kitchen doors in towns across Perth and Kinross
Choose a town for local guide prices and postcode coverage: