Replacement kitchen doors in Folkestone

When do replacement kitchen doors make sense in Folkestone?

Homeowners in Folkestone with solid, well-fitted units but tired doors often choose new fronts rather than living through the upheaval of a full kitchen replacement.

If your Kent kitchen is older, its cabinets may be in sizes that are no longer standard, so made-to-measure doors let you keep units that are still sound. Our Kent coverage reaches every part of Folkestone (CT19) and out towards Hythe, Kent.

What we cover for replacement kitchen doors in Folkestone

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Matching end panels, plinths, cornice and pelmet cut and fitted
Free survey visit to check the carcasses and measure every door and drawer front
Handles or knobs drilled from a template so they sit at a consistent height
New fronts fixed to integrated appliances with their door-fixing kits
Hinge holes drilled to line up with the positions on your carcasses
New soft-close hinges fitted and every door adjusted so the gaps run even

Guide prices for replacement kitchen doors in Folkestone

The figures below are guide prices for Folkestone, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

Guide prices for replacement kitchen doors in Folkestone
Typical project	Guide price
Doors and drawer fronts supplied and fitted (15–20 doors)Standard ranges, with new hinges and handles	£1,200–£3,400
Bespoke, in-frame or hand-painted doorsMade to measure for your carcasses	£2,300–£5,800
Fitting only, doors you have boughtHanging, adjusting, handles drilled and fitted	£340–£920
Matching end panels, plinths and corniceCut and fitted to suit the new doors	£170–£690

Guide ranges cover doors, drawer fronts, hinges and handles for a typical kitchen of 15 to 20 doors; replacing swollen carcasses, worktops or appliances is priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Folkestone homes

You will find Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions throughout Kent. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.

Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey. Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering.

Building regulations, electrics and gas in Folkestone

Replacing kitchen doors needs no planning permission or Building Regulations approval in England, because nothing structural, electrical or plumbed changes. The exception is a listed building, where original fitted cupboards or joinery may need listed building consent before they are altered. If you add plinth or cornice lighting at the same time, the wiring must meet BS 7671, and a new circuit for it would be notifiable under Part P.

Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.

Worth knowing before the fit

Count every door, drawer front, end panel and plinth before asking for prices, including integrated appliance doors and panels at the ends of runs.
If the hob or sink in your Kent kitchen needs to move, plan a fuller refit rather than new doors on a layout that does not work.
Keep one old door until the new ones are fitted, so sizes and hinge positions can be checked if anything does not line up.
Old drawer boxes may not take new fronts neatly; worn runners or unusual fixings sometimes make new drawer boxes worth adding.

Questions about replacement kitchen doors in Folkestone

How much do replacement kitchen doors cost in Folkestone?

Replacement kitchen doors in Folkestone typically cost £1,200 to £3,400 including VAT for 15 to 20 doors and drawer fronts, supplied and fitted, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Folkestone as well?

Yes. As well as Folkestone itself, we cover the rest of Kent and nearby towns such as Hythe, Kent and Dover. The process is the same wherever the kitchen is.

When does a new kitchen make more sense than new doors?

When the problem is more than the look. If several carcasses are swollen or broken, the layout does not work for you, or you want to move the sink, hob or appliances, new doors only cover the issue. New doors suit kitchens whose cabinets are square, dry and well fixed and whose layout still works. We will tell you at the survey which route we think makes sense.

Are new hinges and handles fitted with the doors?

Yes, normally. Old hinges are often worn or set for the old doors, so new soft-close hinges are fitted and adjusted so the doors close quietly and the gaps run even. Handles are drilled from a template so every one sits at the same height and distance from the edge. If you would like to reuse your existing handles, the new doors are drilled to suit them.

Can new doors be fitted to my existing kitchen units?

Usually, yes, as long as the carcasses are sound. We measure every door and drawer front at the survey and check the hinge positions, because sizes vary between makers and older kitchens often use sizes that are no longer standard. Doors are then made to measure or matched to your units, drilled for new hinges and hung so the gaps line up across each run.

Replacement kitchen doors in neighbouring towns

The same service is available a short drive from Folkestone, including: