Replacement kitchen doors in Deal

Is replacement kitchen doors right for your Deal kitchen?

If you have bought a Deal home where the kitchen layout works but the colour does not, new doors and handles can change the look in a day or two.

When one door in a Deal kitchen is broken and the range is no longer made, a full set of new matching doors is often the neatest answer. Kitchens in every part of Deal are covered, and the survey visit is free wherever you are in Kent.

What is included in the work?

After the survey visit we write the scope down. For replacement kitchen doors in Deal it usually covers:

Handles or knobs drilled from a template so they sit at a consistent height
Free survey visit to check the carcasses and measure every door and drawer front
Matching end panels, plinths, cornice and pelmet cut and fitted
Drawer fronts fixed to existing drawer boxes, or new boxes where worn
Doors and drawer fronts made to measure or matched to the existing sizes
New fronts fixed to integrated appliances with their door-fixing kits

Replacement kitchen doors prices in Deal

Use these ranges to plan your budget. They include VAT, reflect costs in the South East, and are firmed up once we have seen your Deal kitchen. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

Replacement kitchen doors prices in Deal
Typical project	Guide price
Doors and drawer fronts supplied and fitted (15–20 doors)Standard ranges, with new hinges and handles	£1,200–£3,400
Bespoke, in-frame or hand-painted doorsMade to measure for your carcasses	£2,300–£5,800
Fitting only, doors you have boughtHanging, adjusting, handles drilled and fitted	£340–£920
Matching end panels, plinths and corniceCut and fitted to suit the new doors	£170–£690

Guide ranges cover doors, drawer fronts, hinges and handles for a typical kitchen of 15 to 20 doors; replacing swollen carcasses, worktops or appliances is priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Deal homes

The housing mix across Kent includes Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions, so no two kitchen fits are quite alike. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.

Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering. Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey.

What rules apply to replacement kitchen doors in Deal?

Replacing kitchen doors needs no planning permission or Building Regulations approval in England, because nothing structural, electrical or plumbed changes. The exception is a listed building, where original fitted cupboards or joinery may need listed building consent before they are altered. If you add plinth or cornice lighting at the same time, the wiring must meet BS 7671, and a new circuit for it would be notifiable under Part P.

Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.

Before you book replacement kitchen doors in Deal

Allow for delivery time on made-to-measure doors; your kitchen stays usable while you wait, as nothing comes off until they arrive.
Count every door, drawer front, end panel and plinth before asking for prices, including integrated appliance doors and panels at the ends of runs.
Open the sink cupboard in your Deal kitchen and press the base; soft or swollen board means that unit needs replacing before new doors.
Old drawer boxes may not take new fronts neatly; worn runners or unusual fixings sometimes make new drawer boxes worth adding.

Questions about replacement kitchen doors in Deal

How much do replacement kitchen doors cost in Deal?

Replacement kitchen doors in Deal typically cost £1,200 to £3,400 including VAT for 15 to 20 doors and drawer fronts, supplied and fitted, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Deal before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Deal. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Can new doors be fitted to my existing kitchen units?

Usually, yes, as long as the carcasses are sound. We measure every door and drawer front at the survey and check the hinge positions, because sizes vary between makers and older kitchens often use sizes that are no longer standard. Doors are then made to measure or matched to your units, drilled for new hinges and hung so the gaps line up across each run.

Are new hinges and handles fitted with the doors?

Yes, normally. Old hinges are often worn or set for the old doors, so new soft-close hinges are fitted and adjusted so the doors close quietly and the gaps run even. Handles are drilled from a template so every one sits at the same height and distance from the edge. If you would like to reuse your existing handles, the new doors are drilled to suit them.

What if some of my kitchen units are water damaged?

Damaged units are replaced before the new doors go on, because swollen chipboard does not recover. The sink base is the usual problem, from slow leaks at the trap or tap, followed by units beside the dishwasher. We check every carcass at the survey, look for the cause of any leak, and price replacement units as a separate line so you can see the cost clearly.

Nearby places we cover

Close to Deal? We cover these nearby towns too: