Replacement kitchen doors in Edmonton

Why replacement kitchen doors for an Edmonton home?

When one door in an Edmonton kitchen is broken and the range is no longer made, a full set of new matching doors is often the neatest answer.

If your Greater London kitchen is older, its cabinets may be in sizes that are no longer standard, so made-to-measure doors let you keep units that are still sound. Homes right across Edmonton are covered, as are nearby places such as Tottenham, Enfield and the villages in between.

What is included in the work?

Your written quote lists everything included. For replacement kitchen doors, that normally means:

Hinge holes drilled to line up with the positions on your carcasses
Doors and drawer fronts made to measure or matched to the existing sizes
Free survey visit to check the carcasses and measure every door and drawer front
Matching end panels, plinths, cornice and pelmet cut and fitted
New soft-close hinges fitted and every door adjusted so the gaps run even
Handles or knobs drilled from a template so they sit at a consistent height

Replacement kitchen doors prices in Edmonton

These guide ranges include VAT at 20% and are adjusted for prices in London. We confirm your price in writing after a free survey visit. Prices in London usually run above the national guide, mainly because labour and parking cost more.

Replacement kitchen doors prices in Edmonton
Typical project	Guide price
Doors and drawer fronts supplied and fitted (15–20 doors)Standard ranges, with new hinges and handles	£1,300–£3,900
Bespoke, in-frame or hand-painted doorsMade to measure for your carcasses	£2,600–£6,500
Fitting only, doors you have boughtHanging, adjusting, handles drilled and fitted	£390–£1,000
Matching end panels, plinths and corniceCut and fitted to suit the new doors	£200–£780

Guide ranges cover doors, drawer fronts, hinges and handles for a typical kitchen of 15 to 20 doors; replacing swollen carcasses, worktops or appliances is priced separately. Prices include VAT at 20%.

House types around Edmonton and what they mean for a kitchen

The housing mix across Greater London includes Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, so no two kitchen fits are quite alike. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Regulations for kitchen work in Edmonton

Replacing kitchen doors needs no planning permission or Building Regulations approval in England, because nothing structural, electrical or plumbed changes. The exception is a listed building, where original fitted cupboards or joinery may need listed building consent before they are altered. If you add plinth or cornice lighting at the same time, the wiring must meet BS 7671, and a new circuit for it would be notifiable under Part P.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Tips before you start

Allow for delivery time on made-to-measure doors; your kitchen stays usable while you wait, as nothing comes off until they arrive.
Open the sink cupboard in your Edmonton kitchen and press the base; soft or swollen board means that unit needs replacing before new doors.
Choose handles after the doors, holding samples against the new colour in your Edmonton kitchen's daylight before anything is drilled.
A new kitchen makes more sense if the carcasses are damaged, the layout does not work, or the sink and hob need to move.

Questions about replacement kitchen doors in Edmonton

How much do replacement kitchen doors cost in Edmonton?

For 15 to 20 doors and drawer fronts, supplied and fitted, budget around £1,300 to £3,900 including VAT in Edmonton. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.

Can you measure up in Edmonton before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Edmonton. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Are new hinges and handles fitted with the doors?

Yes, normally. Old hinges are often worn or set for the old doors, so new soft-close hinges are fitted and adjusted so the doors close quietly and the gaps run even. Handles are drilled from a template so every one sits at the same height and distance from the edge. If you would like to reuse your existing handles, the new doors are drilled to suit them.

Can I change to a completely different door style?

Usually, yes. Slab, shaker and painted doors can all go on standard carcasses if the sizes and hinge positions suit. An in-frame look is more involved, because the doors sit inside a frame built onto the front of the units, so it costs more. A true handleless kitchen uses rails built into the carcasses, so with a door change that look is imitated with edge-profiled doors instead.

What if some of my kitchen units are water damaged?

Damaged units are replaced before the new doors go on, because swollen chipboard does not recover. The sink base is the usual problem, from slow leaks at the trap or tap, followed by units beside the dishwasher. We check every carcass at the survey, look for the cause of any leak, and price replacement units as a separate line so you can see the cost clearly.

Also covering nearby towns

We also carry out replacement kitchen doors in these towns near Edmonton: