Replacement kitchen doors in Margate

Who usually needs replacement kitchen doors in Margate?

Homeowners in Margate with solid, well-fitted units but tired doors often choose new fronts rather than living through the upheaval of a full kitchen replacement.

When one door in a Margate kitchen is broken and the range is no longer made, a full set of new matching doors is often the neatest answer. If your home is in Margate or close by in Broadstairs or Ramsgate, the same survey, quote and fitting process applies.

What is included in the work?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Handles or knobs drilled from a template so they sit at a consistent height
Matching end panels, plinths, cornice and pelmet cut and fitted
Drawer fronts fixed to existing drawer boxes, or new boxes where worn
Doors and drawer fronts made to measure or matched to the existing sizes
New soft-close hinges fitted and every door adjusted so the gaps run even
New fronts fixed to integrated appliances with their door-fixing kits

What do replacement kitchen doors cost in Margate?

As a starting point for Margate, these ranges include VAT at 20% and allow for typical labour costs in the South East. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

What do replacement kitchen doors cost in Margate?
Typical project	Guide price
Doors and drawer fronts supplied and fitted (15–20 doors)Standard ranges, with new hinges and handles	£1,200–£3,400
Bespoke, in-frame or hand-painted doorsMade to measure for your carcasses	£2,300–£5,800
Fitting only, doors you have boughtHanging, adjusting, handles drilled and fitted	£340–£920
Matching end panels, plinths and corniceCut and fitted to suit the new doors	£170–£690

Guide ranges cover doors, drawer fronts, hinges and handles for a typical kitchen of 15 to 20 doors; replacing swollen carcasses, worktops or appliances is priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Margate?

You will find Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions throughout Kent. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.

Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey. Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering.

Do you need approval for replacement kitchen doors in Margate?

Replacing kitchen doors needs no planning permission or Building Regulations approval in England, because nothing structural, electrical or plumbed changes. The exception is a listed building, where original fitted cupboards or joinery may need listed building consent before they are altered. If you add plinth or cornice lighting at the same time, the wiring must meet BS 7671, and a new circuit for it would be notifiable under Part P.

Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.

Before you book replacement kitchen doors in Margate

Allow for delivery time on made-to-measure doors; your kitchen stays usable while you wait, as nothing comes off until they arrive.
Open the sink cupboard in your Margate kitchen and press the base; soft or swollen board means that unit needs replacing before new doors.
Keep one old door until the new ones are fitted, so sizes and hinge positions can be checked if anything does not line up.
Remember the extras: end panels, plinths, cornice, pelmet and integrated appliance doors all need to match the new fronts.

Questions about replacement kitchen doors in Margate

How much do replacement kitchen doors cost in Margate?

Replacement kitchen doors in Margate typically cost £1,200 to £3,400 including VAT for 15 to 20 doors and drawer fronts, supplied and fitted, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Margate?

Yes. We work across Margate, including the CT9 postcode district, and nearby towns such as Broadstairs and Ramsgate. Book a free survey visit and we will arrange a time that suits you.

When does a new kitchen make more sense than new doors?

When the problem is more than the look. If several carcasses are swollen or broken, the layout does not work for you, or you want to move the sink, hob or appliances, new doors only cover the issue. New doors suit kitchens whose cabinets are square, dry and well fixed and whose layout still works. We will tell you at the survey which route we think makes sense.

Can new doors be fitted to my existing kitchen units?

Usually, yes, as long as the carcasses are sound. We measure every door and drawer front at the survey and check the hinge positions, because sizes vary between makers and older kitchens often use sizes that are no longer standard. Doors are then made to measure or matched to your units, drilled for new hinges and hung so the gaps line up across each run.

Are new hinges and handles fitted with the doors?

Yes, normally. Old hinges are often worn or set for the old doors, so new soft-close hinges are fitted and adjusted so the doors close quietly and the gaps run even. Handles are drilled from a template so every one sits at the same height and distance from the edge. If you would like to reuse your existing handles, the new doors are drilled to suit them.

Nearby places we cover

Close to Margate? We cover these nearby towns too: