Kitchen worktop fitting in Wimbledon

Why do people in Wimbledon choose kitchen worktop fitting?

When a Wimbledon kitchen is about to be sold or let, new worktops and upstands can make the room look cared for without replacing any of the units.

Many people in Greater London choose quartz or granite when they upgrade, and need the base units fixed and level before the fabricator can come to template. Wimbledon sits about 6 miles south-west of Westminster, and our Greater London coverage takes in everything in between.

What is included in the work?

Your written quote lists everything included. For kitchen worktop fitting, that normally means:

Old worktops removed and taken away, with the sink and hob disconnected safely
Laminate jointed with a mason's mitre or joint strips, and every cut edge sealed
Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers
Solid wood oiled before and after fitting and fixed to allow seasonal movement
Undermount sink and hob cut-outs cut and finished by the stone fabricator
Quartz, granite or sintered stone templated once the base units are fixed and level

Kitchen worktop fitting prices in Wimbledon

Typical kitchen worktop fitting prices for homes in Wimbledon, including VAT and adjusted for London. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour in London generally costs more than the UK average, which lifts these ranges a little.

Kitchen worktop fitting prices in Wimbledon
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£650–£1,600
Solid wood worktops, supplied and fittedOiled before and after fitting	£1,200–£2,300
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£2,000–£4,200
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£2,300–£4,600
Old worktops removed and taken awayMore for stone	£100–£320

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

Kitchens in homes around Wimbledon

Across Greater London you will often find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, and each shapes the kitchen differently. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Regulations for kitchen work in Wimbledon

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Getting the most from your kitchen worktop fitting

Keep a trivet beside the hob from the first day, whichever surface you choose; heat marks are hard to repair on most materials.
Before templating day at your Wimbledon home, make sure the sink, tap and hob are on site so the stone can be cut to them.
If your Wimbledon kitchen has a gas hob, a Gas Safe registered engineer needs to disconnect it before the old worktops come off.
Stone worktops are templated only once the base units are fixed and level, so allow one to two weeks between fitting and finishing.

Questions about kitchen worktop fitting in Wimbledon

How much does kitchen worktop fitting cost in Wimbledon?

Kitchen worktop fitting in Wimbledon typically costs £650 to £1,600 including VAT for laminate worktops, supplied and fitted, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Wimbledon do you work in?

All of them. Our Greater London coverage takes in the whole of Wimbledon, including the SW19 postcode district, as well as surrounding towns such as Morden. If you are unsure, send us your postcode.

Can I put hot pans on a quartz worktop?

It is safer not to. Quartz contains resin that can discolour or crack under sudden heat, so pans straight from the hob or oven should go on a trivet or pan stand. Granite copes better with heat but can still be marked or cracked by intense heat in one spot, and laminate and wood scorch easily. A trivet kept next to the hob protects any worktop.

How long does it take to fit new worktops?

Usually a day for laminate or solid wood in a typical kitchen, cut and jointed on site. Stone takes two visits: the fabricator templates once the base units are fixed and level, then cuts the worktops, the sink and hob openings and any drainer grooves, and fits them about one to two weeks later. In the meantime the sink is usually out of use, so plan meals around that gap.

How do I look after a solid wood worktop?

Oil it regularly and keep it away from standing water. Wood is oiled on every face before fitting and given further coats once in place, then re-oiled more often in the first months. Wipe up round the sink and tap, and do not leave wet cloths or a dripping kettle on it. It is fixed with slotted brackets so it can expand and shrink with the seasons without cracking.

Kitchen worktop fitting near Wimbledon

The same service is available a short drive from Wimbledon, including: