Flat-pack kitchen fitting in Wimbledon

Why flat-pack kitchen fitting for a Wimbledon home?

If you have bought a flat-pack kitchen for your Wimbledon home to keep costs down, careful assembly makes sure that saving never shows in the finished kitchen.

Flat-pack is a common choice in Wimbledon when units have to go up narrow stairs to a flat, because boxed boards are far easier to carry than built cabinets. We cover all of Wimbledon, including the SW19 postcode district, and travel out to neighbouring towns across Greater London.

What we cover for flat-pack kitchen fitting in Wimbledon

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Free survey visit to check the plan, the boxes and the room
Laminate worktops cut and jointed, with cut edges sealed around the sink
Wall units hung on hanging rails or brackets fixed securely into the wall
Back panels fitted fully into their grooves or fixed as the instructions require
Base units levelled on adjustable legs and fixed to the wall and to each other

Guide prices for flat-pack kitchen fitting in Wimbledon

These guide ranges include VAT at 20% and are adjusted for prices in London. We confirm your price in writing after a free survey visit. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

Guide prices for flat-pack kitchen fitting in Wimbledon
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£2,300–£3,900
Medium flat-pack kitchen, built and fittedAs above	£3,600–£5,500
Large flat-pack kitchen with tall units, built and fittedAs above	£5,200–£7,200

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Fitting kitchens in older and newer Wimbledon homes

In and around Wimbledon, homes range across Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Do you need approval for flat-pack kitchen fitting in Wimbledon?

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Practical advice for Wimbledon homeowners

If the flat-pack sink base in your Wimbledon kitchen sits beside a washing machine or dishwasher, ask for a sink base mat to protect the carcass floor.
If you are building some units yourself before the fit, leave the back panels and hinges for us to check before anything is fixed to the wall.
Count the boxes against the delivery note when your flat-pack kitchen arrives in Wimbledon; orders can run to dozens of boxes and one short box can stall a fit.
Ask whether a sink base mat is included, and make sure every cut edge around the sink, waste and pipe holes is sealed.

Questions about flat-pack kitchen fitting in Wimbledon

How much does flat-pack kitchen fitting cost in Wimbledon?

For a small flat-pack kitchen, built and fitted, budget around £2,300 to £3,900 including VAT in Wimbledon. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.

Do you work near Wimbledon as well?

Yes. As well as Wimbledon itself, we cover the rest of Greater London and nearby towns such as Morden and Earlsfield. The process is the same wherever the kitchen is.

Can you fit a flat-pack kitchen I have already started building?

Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

Nearby places we cover

We also carry out flat-pack kitchen fitting in these towns near Wimbledon: