Kitchen worktop fitting in Westminster

Thinking about kitchen worktop fitting in Westminster?

When a Westminster kitchen is about to be sold or let, new worktops and upstands can make the room look cared for without replacing any of the units.

Some homeowners across Greater London have already ordered stone worktops from a supplier and need someone to fix and level the base units so templating can go ahead. If your home is in Westminster or close by in Pimlico or Chelsea, the same survey, quote and fitting process applies.

What is in a typical job?

Here is what usually goes into kitchen worktop fitting, adjusted to your Westminster kitchen after we have measured it:

Solid wood oiled before and after fitting and fixed to allow seasonal movement
Matching upstands fitted and the joint to the wall sealed
Undermount sink and hob cut-outs cut and finished by the stone fabricator
Laminate jointed with a mason's mitre or joint strips, and every cut edge sealed
Free survey visit to measure the runs and check the base units are level
Old worktops removed and taken away, with the sink and hob disconnected safely

Guide prices for kitchen worktop fitting in Westminster

These guide ranges include VAT at 20% and are adjusted for prices in London. We confirm your price in writing after a free survey visit. Labour in London generally costs more than the UK average, which lifts these ranges a little.

Guide prices for kitchen worktop fitting in Westminster
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£650–£1,600
Solid wood worktops, supplied and fittedOiled before and after fitting	£1,200–£2,300
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£2,000–£4,200
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£2,300–£4,600
Old worktops removed and taken awayMore for stone	£100–£320

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

Fitting kitchens in older and newer Westminster homes

In and around Westminster, homes range across Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Do you need approval for kitchen worktop fitting in Westminster?

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Before you book kitchen worktop fitting in Westminster

If your Westminster kitchen has a gas hob, a Gas Safe registered engineer needs to disconnect it before the old worktops come off.
Check that full-length worktops can get into your Westminster home; long lengths need a clear, straight route through the front door and hall.
If your Greater London home has uneven walls, ask how the worktop will be scribed so the back edge meets the wall without wide gaps.
Plan the joints: keep laminate joints away from the sink where possible, while stone joints are positioned by the fabricator to suit the slabs.

Questions about kitchen worktop fitting in Westminster

How much does kitchen worktop fitting cost in Westminster?

Kitchen worktop fitting in Westminster typically costs £650 to £1,600 including VAT for laminate worktops, supplied and fitted, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Westminster?

Yes. We work across Westminster, including the SW1 and W2 postcode districts, and nearby towns such as Pimlico and Chelsea. Book a free survey visit and we will arrange a time that suits you.

How are laminate worktops joined at corners?

With either a mason's mitre or a joint strip. A mason's mitre is routed with a jig so the front edge profile turns the corner, then glued, sealed and pulled tight with connector bolts underneath. A joint strip is a metal or colour-matched profile fixed and sealed between the two lengths. Either way, every cut edge, including the sink and hob cut-outs, is sealed so water cannot swell the core.

How long does it take to fit new worktops?

Usually a day for laminate or solid wood in a typical kitchen, cut and jointed on site. Stone takes two visits: the fabricator templates once the base units are fixed and level, then cuts the worktops, the sink and hob openings and any drainer grooves, and fits them about one to two weeks later. In the meantime the sink is usually out of use, so plan meals around that gap.

Will you fit stone worktops I have ordered myself?

Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.

Kitchen worktop fitting near Westminster

Neighbouring towns where we offer kitchen worktop fitting: