Kitchen worktop fitting in Pimlico

What prompts kitchen worktop fitting in Pimlico?

When a Pimlico kitchen is about to be sold or let, new worktops and upstands can make the room look cared for without replacing any of the units.

Some homeowners across Greater London have already ordered stone worktops from a supplier and need someone to fix and level the base units so templating can go ahead. Homes right across Pimlico are covered, as are nearby places such as Westminster, Battersea and the villages in between.

What does kitchen worktop fitting in Pimlico include?

Your written quote lists everything included. For kitchen worktop fitting, that normally means:

Solid wood oiled before and after fitting and fixed to allow seasonal movement
Old worktops removed and taken away, with the sink and hob disconnected safely
Quartz, granite or sintered stone templated once the base units are fixed and level
Matching upstands fitted and the joint to the wall sealed
Laminate jointed with a mason's mitre or joint strips, and every cut edge sealed
Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers

Kitchen worktop fitting prices in Pimlico

Typical kitchen worktop fitting prices for homes in Pimlico, including VAT and adjusted for London. Your own figure depends on the size of the kitchen, the layout and what is moving. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

Kitchen worktop fitting prices in Pimlico
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£650–£1,600
Solid wood worktops, supplied and fittedOiled before and after fitting	£1,200–£2,300
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£2,000–£4,200
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£2,300–£4,600
Old worktops removed and taken awayMore for stone	£100–£320

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

Fitting kitchens in older and newer Pimlico homes

You will find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis throughout Greater London. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

What rules apply to kitchen worktop fitting in Pimlico?

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Getting the most from your kitchen worktop fitting

Before templating day at your Pimlico home, make sure the sink, tap and hob are on site so the stone can be cut to them.
If your Greater London home has uneven walls, ask how the worktop will be scribed so the back edge meets the wall without wide gaps.
For a Pimlico kitchen with stone worktops, ask whether the upstands will be cut from the same slab so the colour and pattern match.
Solid wood needs regular re-oiling and should not be left with standing water around the sink, tap or kettle.

Questions about kitchen worktop fitting in Pimlico

How much does kitchen worktop fitting cost in Pimlico?

Guide prices in Pimlico are about £650 to £1,600 including VAT for laminate worktops, supplied and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Can you measure up in Pimlico before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Pimlico. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Will you fit stone worktops I have ordered myself?

Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.

Can I put hot pans on a quartz worktop?

It is safer not to. Quartz contains resin that can discolour or crack under sudden heat, so pans straight from the hob or oven should go on a trivet or pan stand. Granite copes better with heat but can still be marked or cracked by intense heat in one spot, and laminate and wood scorch easily. A trivet kept next to the hob protects any worktop.

How do I look after a solid wood worktop?

Oil it regularly and keep it away from standing water. Wood is oiled on every face before fitting and given further coats once in place, then re-oiled more often in the first months. Wipe up round the sink and tap, and do not leave wet cloths or a dripping kettle on it. It is fixed with slotted brackets so it can expand and shrink with the seasons without cracking.

Kitchen worktop fitting in neighbouring towns

We also carry out kitchen worktop fitting in these towns near Pimlico: