Kitchen worktop fitting in Sevenoaks

Thinking about kitchen worktop fitting in Sevenoaks?

Solid wood that has blackened around the sink and tap is a common reason people in Sevenoaks ask about replacing their worktops with something new.

If your Kent kitchen still has a dated tiled or laminate surface, new worktops often go in with a new sink, tap and splashback at the same time. We cover all of Sevenoaks, including the TN13 postcode district, and travel out to neighbouring towns across Kent.

What does kitchen worktop fitting in Sevenoaks include?

Here is what usually goes into kitchen worktop fitting, adjusted to your Sevenoaks kitchen after we have measured it:

Old worktops removed and taken away, with the sink and hob disconnected safely
Quartz, granite or sintered stone templated once the base units are fixed and level
Solid wood oiled before and after fitting and fixed to allow seasonal movement
Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers
Laminate jointed with a mason's mitre or joint strips, and every cut edge sealed
Free survey visit to measure the runs and check the base units are level

Guide prices for kitchen worktop fitting in Sevenoaks

The figures below are guide prices for Sevenoaks, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

Guide prices for kitchen worktop fitting in Sevenoaks
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£580–£1,400
Solid wood worktops, supplied and fittedOiled before and after fitting	£1,000–£2,100
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£1,700–£3,700
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£2,100–£4,000
Old worktops removed and taken awayMore for stone	£90–£290

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

What kind of kitchens do we fit in Sevenoaks?

In and around Sevenoaks, homes range across Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.

Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering. Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey.

What rules apply to kitchen worktop fitting in Sevenoaks?

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.

Planning ahead

Clear the worktops and the cupboards beneath them before fitting day, as the old tops and the sink need space to come out.
If your Sevenoaks kitchen has a gas hob, a Gas Safe registered engineer needs to disconnect it before the old worktops come off.
If your Kent home has uneven walls, ask how the worktop will be scribed so the back edge meets the wall without wide gaps.
Plan the joints: keep laminate joints away from the sink where possible, while stone joints are positioned by the fabricator to suit the slabs.

Questions about kitchen worktop fitting in Sevenoaks

How much does kitchen worktop fitting cost in Sevenoaks?

Guide prices in Sevenoaks are about £580 to £1,400 including VAT for laminate worktops, supplied and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Sevenoaks as well?

Yes. As well as Sevenoaks itself, we cover the rest of Kent and nearby towns such as Tonbridge and Edenbridge. The process is the same wherever the kitchen is.

How do I look after a solid wood worktop?

Oil it regularly and keep it away from standing water. Wood is oiled on every face before fitting and given further coats once in place, then re-oiled more often in the first months. Wipe up round the sink and tap, and do not leave wet cloths or a dripping kettle on it. It is fixed with slotted brackets so it can expand and shrink with the seasons without cracking.

Can I put hot pans on a quartz worktop?

It is safer not to. Quartz contains resin that can discolour or crack under sudden heat, so pans straight from the hob or oven should go on a trivet or pan stand. Granite copes better with heat but can still be marked or cracked by intense heat in one spot, and laminate and wood scorch easily. A trivet kept next to the hob protects any worktop.

How are laminate worktops joined at corners?

With either a mason's mitre or a joint strip. A mason's mitre is routed with a jig so the front edge profile turns the corner, then glued, sealed and pulled tight with connector bolts underneath. A joint strip is a metal or colour-matched profile fixed and sealed between the two lengths. Either way, every cut edge, including the sink and hob cut-outs, is sealed so water cannot swell the core.

Also covering nearby towns

Neighbouring towns where we offer kitchen worktop fitting: