Cooker hood installation in Sevenoaks

Thinking about cooker hood installation in Sevenoaks?

Homeowners in Sevenoaks adding a hob to a new island often need a ceiling hood with solid fixings and a duct route planned before the ceiling is closed up.

Cooks across Kent who fry, grill or stir-fry often find a recirculating hood leaves smells in the house, and look at ducting the air outside instead. Kitchens in every part of Sevenoaks are covered, and the survey visit is free wherever you are in Kent.

What we cover for cooker hood installation in Sevenoaks

Here is what usually goes into cooker hood installation, adjusted to your Sevenoaks kitchen after we have measured it:

Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
Hood fixed at the height set by the hood and hob manufacturers
Short, straight runs of rigid ducting wherever the route allows
Power supply connected by an electrician and tested to BS 7671
Survey of the hob position, duct route, outside wall and any open-flued appliance
Recirculating hoods fitted with carbon filters, and their limits explained

Guide prices for cooker hood installation in Sevenoaks

The figures below are guide prices for Sevenoaks, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

Guide prices for cooker hood installation in Sevenoaks
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£140–£280
New ducted hood through an outside wallCore drilling, ducting run and external grille	£340–£1,000
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£340–£720
Recirculating hood fittedNo ducting; carbon filters need replacing	£140–£340

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Sevenoaks?

In and around Sevenoaks, homes range across Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.

Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey. Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering.

What rules apply to cooker hood installation in Sevenoaks?

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.

Getting the most from your cooker hood installation

Ask for rigid ducting rather than flexible hose wherever the route allows, as it moves more air, gathers less grease and is usually quieter.
Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
Replace the carbon filters in a recirculating hood as often as the manufacturer advises, and clean the grease filters regularly so the hood keeps working well.
In a flat or a listed building, check what consents are needed before any hole is cut through an outside wall.

Questions about cooker hood installation in Sevenoaks

How much does cooker hood installation cost in Sevenoaks?

Cooker hood installation in Sevenoaks typically costs £140 to £280 including VAT for a like-for-like cooker hood swap, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Sevenoaks before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Sevenoaks. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Cooker hood installation in neighbouring towns

Close to Sevenoaks? We cover these nearby towns too: