Kitchen worktop fitting in New Malden

Thinking about kitchen worktop fitting in New Malden?

Homeowners in New Malden with sound units but worn, chipped or swollen laminate often replace just the worktops, keeping the rest of the kitchen as it is.

If you have bought a kitchen online for your New Malden home, you may need a fitter to cut and joint the laminate or wood worktops properly on site. We work throughout New Malden (KT3) and across the wider Greater London area.

What we cover for kitchen worktop fitting in New Malden

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Old worktops removed and taken away, with the sink and hob disconnected safely
Undermount sink and hob cut-outs cut and finished by the stone fabricator
Quartz, granite or sintered stone templated once the base units are fixed and level
Matching upstands fitted and the joint to the wall sealed
Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers
Solid wood oiled before and after fitting and fixed to allow seasonal movement

What does kitchen worktop fitting cost in New Malden?

As a starting point for New Malden, these ranges include VAT at 20% and allow for typical labour costs in London. Labour in London generally costs more than the UK average, which lifts these ranges a little.

What does kitchen worktop fitting cost in New Malden?
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£650–£1,600
Solid wood worktops, supplied and fittedOiled before and after fitting	£1,200–£2,300
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£2,000–£4,200
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£2,300–£4,600
Old worktops removed and taken awayMore for stone	£100–£320

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

Local homes and their kitchens

You will find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis throughout Greater London. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Do you need approval for kitchen worktop fitting in New Malden?

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Practical advice for New Malden homeowners

Plan the joint positions before ordering laminate, keeping them away from the sink and dishwasher, where water is most likely to sit.
Check that full-length worktops can get into your New Malden home; long lengths need a clear, straight route through the front door and hall.
If your Greater London home has uneven walls, ask how the worktop will be scribed so the back edge meets the wall without wide gaps.
Have the sink, tap and hob on site for templating, so the fabricator can cut the stone to the exact items you have bought.

Questions about kitchen worktop fitting in New Malden

How much does kitchen worktop fitting cost in New Malden?

Kitchen worktop fitting in New Malden typically costs £650 to £1,600 including VAT for laminate worktops, supplied and fitted, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in New Malden before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in New Malden. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

How long does it take to fit new worktops?

Usually a day for laminate or solid wood in a typical kitchen, cut and jointed on site. Stone takes two visits: the fabricator templates once the base units are fixed and level, then cuts the worktops, the sink and hob openings and any drainer grooves, and fits them about one to two weeks later. In the meantime the sink is usually out of use, so plan meals around that gap.

How are laminate worktops joined at corners?

With either a mason's mitre or a joint strip. A mason's mitre is routed with a jig so the front edge profile turns the corner, then glued, sealed and pulled tight with connector bolts underneath. A joint strip is a metal or colour-matched profile fixed and sealed between the two lengths. Either way, every cut edge, including the sink and hob cut-outs, is sealed so water cannot swell the core.

Will you fit stone worktops I have ordered myself?

Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.

Also covering nearby towns

Close to New Malden? We cover these nearby towns too: