Kitchen electrics in New Malden

Thinking about kitchen electrics in New Malden?

When a New Malden kitchen is stripped back to bare walls, running new cables then costs far less than chasing them in after plastering and tiling.

Kitchens bought online often come with integrated appliances that need their own supplies and switches, so it pays to plan those for your New Malden kitchen before the units arrive. Homes right across New Malden are covered, as are nearby places such as Worcester Park, Surbiton and the villages in between.

What we cover for kitchen electrics in New Malden

Your written quote lists everything included. For kitchen electrics, that normally means:

Second fix of sockets, switches and appliance connections once tiling is done
Accessible isolation switches for integrated appliances, reachable without pulling units out
First-fix cables and back boxes run before plastering or boarding
A check of the consumer unit, existing circuits and earthing before the layout is fixed
A dedicated circuit for an oven, range cooker or induction hob where needed
Socket positions planned around worktop appliances, the kettle spot and any breakfast bar

Guide prices for kitchen electrics in New Malden

The figures below are guide prices for New Malden, including VAT and adjusted for typical costs across London. The fixed price comes after we have measured up. Prices in London usually run above the national guide, mainly because labour and parking cost more.

Guide prices for kitchen electrics in New Malden
Typical project	Guide price
Extra sockets or spurs on existing circuitsNew positions to suit the layout	£320–£650
Kitchen electrics for a full refitCircuits, sockets, appliance points and under-cabinet lighting	£650–£2,000
New cooker or induction circuitDedicated circuit from the consumer unit, tested and certified	£390–£910

Guide ranges cover the electrician's labour, cable, back boxes and standard white accessories with testing and certification; a consumer unit upgrade, decorative faceplates and plaster repairs are quoted separately if needed. Prices include VAT at 20%.

Kitchens in homes around New Malden

The housing mix across Greater London includes Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, so no two kitchen fits are quite alike. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Building regulations, electrics and gas in New Malden

In England, Part P makes a new circuit, such as a dedicated cooker or induction hob circuit, and a replacement consumer unit notifiable. That work is self-certified by an electrician registered with a competent person scheme, who notifies the council, or approved through building control. Adding sockets or spurs to an existing kitchen circuit is not notifiable in England, but it must still meet BS 7671 and should be recorded on a Minor Electrical Installation Works Certificate.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Worth knowing before the fit

Find your consumer unit and take a photo of it before the survey of your New Malden home, so the electrician can see straight away whether it has spare ways.
Keep your appliance manuals to hand, as the installation pages state the power rating and the type of isolation each appliance needs.
If you let a property in Greater London, keep the kitchen certificates with your electrical inspection report so the next inspector can see what changed.
Confirm the hob and oven ratings before first fix, because an induction hob or double oven may need a larger dedicated circuit.

Questions about kitchen electrics in New Malden

How much do kitchen electrics cost in New Malden?

Guide prices in New Malden are about £320 to £650 including VAT for extra sockets or spurs on existing circuits. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near New Malden as well?

Yes. As well as New Malden itself, we cover the rest of Greater London and nearby towns such as Worcester Park and Surbiton. The process is the same wherever the kitchen is.

Does an induction hob need its own circuit?

Usually, yes. Most induction hobs draw too much power to run from a plug socket, so they are wired to a dedicated cooker circuit from the consumer unit. One circuit can sometimes feed both a hob and an oven if the cable and protection are sized for them. The electrician checks the hob rating against the existing circuit at the survey and tells you whether a new one is needed.

Do I need an electrician to add sockets in a kitchen?

Yes, any kitchen wiring is a job for a qualified electrician. In England, adding sockets to an existing circuit is not notifiable, but it must meet BS 7671 and should be recorded on a Minor Works Certificate. In Wales the same job is notifiable because it extends a circuit in a kitchen. Scotland and Northern Ireland have no notification step, but the same wiring standard applies.

Will I need a new consumer unit for a new kitchen?

Not always. If the existing consumer unit has spare ways, RCD protection and is in sound condition, new kitchen circuits can often be added to it. An older board with no RCD protection, no spare space or signs of damage may need replacing first. That is notifiable in England and Wales, and it is quoted separately once the electrician has inspected it at the survey.

Nearby places we cover

We also carry out kitchen electrics in these towns near New Malden: