Kitchen worktop fitting in Maidstone

Thinking about kitchen worktop fitting in Maidstone?

Some homeowners across Kent have already ordered stone worktops from a supplier and need someone to fix and level the base units so templating can go ahead.

Homeowners in Maidstone with sound units but worn, chipped or swollen laminate often replace just the worktops, keeping the rest of the kitchen as it is. If your home is in Maidstone or close by in Chatham or Rochester, the same survey, quote and fitting process applies.

What does kitchen worktop fitting in Maidstone include?

After the survey visit we write the scope down. For kitchen worktop fitting in Maidstone it usually covers:

Free survey visit to measure the runs and check the base units are level
Undermount sink and hob cut-outs cut and finished by the stone fabricator
Matching upstands fitted and the joint to the wall sealed
Old worktops removed and taken away, with the sink and hob disconnected safely
Laminate jointed with a mason's mitre or joint strips, and every cut edge sealed
Quartz, granite or sintered stone templated once the base units are fixed and level

What should you budget for kitchen worktop fitting in Maidstone?

As a starting point for Maidstone, these ranges include VAT at 20% and allow for typical labour costs in the South East. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

What should you budget for kitchen worktop fitting in Maidstone?
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£580–£1,400
Solid wood worktops, supplied and fittedOiled before and after fitting	£1,000–£2,100
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£1,700–£3,700
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£2,100–£4,000
Old worktops removed and taken awayMore for stone	£90–£290

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

Local homes and their kitchens

You will find Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions throughout Kent. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.

Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering. Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey.

Regulations for kitchen work in Maidstone

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.

Getting the most from your kitchen worktop fitting

If your Kent home has uneven walls, ask how the worktop will be scribed so the back edge meets the wall without wide gaps.
Before templating day at your Maidstone home, make sure the sink, tap and hob are on site so the stone can be cut to them.
If your Maidstone kitchen has a gas hob, a Gas Safe registered engineer needs to disconnect it before the old worktops come off.
Use trivets for hot pans on every type of worktop; sudden heat can scorch laminate and wood and mark or crack some stone.

Questions about kitchen worktop fitting in Maidstone

How much does kitchen worktop fitting cost in Maidstone?

Kitchen worktop fitting in Maidstone typically costs £580 to £1,400 including VAT for laminate worktops, supplied and fitted, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Maidstone before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Maidstone. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

How do I look after a solid wood worktop?

Oil it regularly and keep it away from standing water. Wood is oiled on every face before fitting and given further coats once in place, then re-oiled more often in the first months. Wipe up round the sink and tap, and do not leave wet cloths or a dripping kettle on it. It is fixed with slotted brackets so it can expand and shrink with the seasons without cracking.

Will you fit stone worktops I have ordered myself?

Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.

How are laminate worktops joined at corners?

With either a mason's mitre or a joint strip. A mason's mitre is routed with a jig so the front edge profile turns the corner, then glued, sealed and pulled tight with connector bolts underneath. A joint strip is a metal or colour-matched profile fixed and sealed between the two lengths. Either way, every cut edge, including the sink and hob cut-outs, is sealed so water cannot swell the core.

Kitchen worktop fitting in neighbouring towns

Neighbouring towns where we offer kitchen worktop fitting: