Kitchen worktop fitting in Sittingbourne

What prompts kitchen worktop fitting in Sittingbourne?

Solid wood that has blackened around the sink and tap is a common reason people in Sittingbourne ask about replacing their worktops with something new.

Homeowners in Sittingbourne with sound units but worn, chipped or swollen laminate often replace just the worktops, keeping the rest of the kitchen as it is. If your home is in Sittingbourne or close by in Faversham or Gillingham, the same survey, quote and fitting process applies.

What does kitchen worktop fitting in Sittingbourne include?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Laminate jointed with a mason's mitre or joint strips, and every cut edge sealed
Free survey visit to measure the runs and check the base units are level
Quartz, granite or sintered stone templated once the base units are fixed and level
Undermount sink and hob cut-outs cut and finished by the stone fabricator
Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers
Old worktops removed and taken away, with the sink and hob disconnected safely

What does kitchen worktop fitting cost in Sittingbourne?

Typical kitchen worktop fitting prices for homes in Sittingbourne, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

What does kitchen worktop fitting cost in Sittingbourne?
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£580–£1,400
Solid wood worktops, supplied and fittedOiled before and after fitting	£1,000–£2,100
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£1,700–£3,700
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£2,100–£4,000
Old worktops removed and taken awayMore for stone	£90–£290

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

Kitchens in homes around Sittingbourne

Typical homes in this part of Kent include Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.

Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey. Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering.

Regulations for kitchen work in Sittingbourne

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.

Practical advice for Sittingbourne homeowners

If your Sittingbourne kitchen has a gas hob, a Gas Safe registered engineer needs to disconnect it before the old worktops come off.
Plan the joint positions before ordering laminate, keeping them away from the sink and dishwasher, where water is most likely to sit.
For a Sittingbourne kitchen with stone worktops, ask whether the upstands will be cut from the same slab so the colour and pattern match.
Stone worktops are templated only once the base units are fixed and level, so allow one to two weeks between fitting and finishing.

Questions about kitchen worktop fitting in Sittingbourne

How much does kitchen worktop fitting cost in Sittingbourne?

Kitchen worktop fitting in Sittingbourne typically costs £580 to £1,400 including VAT for laminate worktops, supplied and fitted, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Sittingbourne do you work in?

All of them. Our Kent coverage takes in the whole of Sittingbourne, including the ME10 postcode district, as well as surrounding towns such as Faversham. If you are unsure, send us your postcode.

How do I look after a solid wood worktop?

Oil it regularly and keep it away from standing water. Wood is oiled on every face before fitting and given further coats once in place, then re-oiled more often in the first months. Wipe up round the sink and tap, and do not leave wet cloths or a dripping kettle on it. It is fixed with slotted brackets so it can expand and shrink with the seasons without cracking.

How are laminate worktops joined at corners?

With either a mason's mitre or a joint strip. A mason's mitre is routed with a jig so the front edge profile turns the corner, then glued, sealed and pulled tight with connector bolts underneath. A joint strip is a metal or colour-matched profile fixed and sealed between the two lengths. Either way, every cut edge, including the sink and hob cut-outs, is sealed so water cannot swell the core.

Can I put hot pans on a quartz worktop?

It is safer not to. Quartz contains resin that can discolour or crack under sudden heat, so pans straight from the hob or oven should go on a trivet or pan stand. Granite copes better with heat but can still be marked or cracked by intense heat in one spot, and laminate and wood scorch easily. A trivet kept next to the hob protects any worktop.

Also covering nearby towns

Neighbouring towns where we offer kitchen worktop fitting: