Kitchen worktop fitting in Greenwich

What prompts kitchen worktop fitting in Greenwich?

Solid wood that has blackened around the sink and tap is a common reason people in Greenwich ask about replacing their worktops with something new.

Many people in Greater London choose quartz or granite when they upgrade, and need the base units fixed and level before the fabricator can come to template. Greenwich sits about 6 miles east of Westminster, and our Greater London coverage takes in everything in between.

What does the job involve?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Laminate jointed with a mason's mitre or joint strips, and every cut edge sealed
Quartz, granite or sintered stone templated once the base units are fixed and level
Old worktops removed and taken away, with the sink and hob disconnected safely
Matching upstands fitted and the joint to the wall sealed
Free survey visit to measure the runs and check the base units are level
Undermount sink and hob cut-outs cut and finished by the stone fabricator

What does kitchen worktop fitting cost in Greenwich?

The figures below are guide prices for Greenwich, including VAT and adjusted for typical costs across London. The fixed price comes after we have measured up. Labour in London generally costs more than the UK average, which lifts these ranges a little.

What does kitchen worktop fitting cost in Greenwich?
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£650–£1,600
Solid wood worktops, supplied and fittedOiled before and after fitting	£1,200–£2,300
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£2,000–£4,200
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£2,300–£4,600
Old worktops removed and taken awayMore for stone	£100–£320

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

Fitting kitchens in older and newer Greenwich homes

The housing mix across Greater London includes Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, so no two kitchen fits are quite alike. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

What rules apply to kitchen worktop fitting in Greenwich?

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Worth knowing before the fit

Plan the joint positions before ordering laminate, keeping them away from the sink and dishwasher, where water is most likely to sit.
Keep a trivet beside the hob from the first day, whichever surface you choose; heat marks are hard to repair on most materials.
Check that full-length worktops can get into your Greenwich home; long lengths need a clear, straight route through the front door and hall.
Quartz and granite are heavy; the units must be sound, level and well fixed, and any swollen or weak carcasses replaced first.

Questions about kitchen worktop fitting in Greenwich

How much does kitchen worktop fitting cost in Greenwich?

For laminate worktops, supplied and fitted, budget around £650 to £1,600 including VAT in Greenwich. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.

Do you work near Greenwich as well?

Yes. As well as Greenwich itself, we cover the rest of Greater London and nearby towns such as New Cross and Blackheath. The process is the same wherever the kitchen is.

How are laminate worktops joined at corners?

With either a mason's mitre or a joint strip. A mason's mitre is routed with a jig so the front edge profile turns the corner, then glued, sealed and pulled tight with connector bolts underneath. A joint strip is a metal or colour-matched profile fixed and sealed between the two lengths. Either way, every cut edge, including the sink and hob cut-outs, is sealed so water cannot swell the core.

How do I look after a solid wood worktop?

Oil it regularly and keep it away from standing water. Wood is oiled on every face before fitting and given further coats once in place, then re-oiled more often in the first months. Wipe up round the sink and tap, and do not leave wet cloths or a dripping kettle on it. It is fixed with slotted brackets so it can expand and shrink with the seasons without cracking.

Will you fit stone worktops I have ordered myself?

Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.

Also covering nearby towns

Close to Greenwich? We cover these nearby towns too: