Kitchen worktop fitting in Brockley

What prompts kitchen worktop fitting in Brockley?

When a Brockley kitchen is about to be sold or let, new worktops and upstands can make the room look cared for without replacing any of the units.

If your Greater London kitchen still has a dated tiled or laminate surface, new worktops often go in with a new sink, tap and splashback at the same time. Kitchens in every part of Brockley are covered, and the survey visit is free wherever you are in Greater London.

What does kitchen worktop fitting in Brockley include?

The exact scope is agreed after the survey, but a typical job in Brockley covers:

Undermount sink and hob cut-outs cut and finished by the stone fabricator
Matching upstands fitted and the joint to the wall sealed
Old worktops removed and taken away, with the sink and hob disconnected safely
Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers
Laminate jointed with a mason's mitre or joint strips, and every cut edge sealed
Quartz, granite or sintered stone templated once the base units are fixed and level

What should you budget for kitchen worktop fitting in Brockley?

Use these ranges to plan your budget. They include VAT, reflect costs in London, and are firmed up once we have seen your Brockley kitchen. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

What should you budget for kitchen worktop fitting in Brockley?
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£650–£1,600
Solid wood worktops, supplied and fittedOiled before and after fitting	£1,200–£2,300
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£2,000–£4,200
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£2,300–£4,600
Old worktops removed and taken awayMore for stone	£100–£320

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

What kind of kitchens do we fit in Brockley?

The housing mix across Greater London includes Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, so no two kitchen fits are quite alike. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Building regulations, electrics and gas in Brockley

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Tips before you start

Check that full-length worktops can get into your Brockley home; long lengths need a clear, straight route through the front door and hall.
If your Greater London home has uneven walls, ask how the worktop will be scribed so the back edge meets the wall without wide gaps.
If your Brockley kitchen has a gas hob, a Gas Safe registered engineer needs to disconnect it before the old worktops come off.
Quartz and granite are heavy; the units must be sound, level and well fixed, and any swollen or weak carcasses replaced first.

Questions about kitchen worktop fitting in Brockley

How much does kitchen worktop fitting cost in Brockley?

For laminate worktops, supplied and fitted, budget around £650 to £1,600 including VAT in Brockley. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.

Which parts of Brockley do you work in?

All of them. Our Greater London coverage takes in the whole of Brockley, including the SE4 postcode district, as well as surrounding towns such as New Cross. If you are unsure, send us your postcode.

How do I look after a solid wood worktop?

Oil it regularly and keep it away from standing water. Wood is oiled on every face before fitting and given further coats once in place, then re-oiled more often in the first months. Wipe up round the sink and tap, and do not leave wet cloths or a dripping kettle on it. It is fixed with slotted brackets so it can expand and shrink with the seasons without cracking.

Will you fit stone worktops I have ordered myself?

Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.

How are laminate worktops joined at corners?

With either a mason's mitre or a joint strip. A mason's mitre is routed with a jig so the front edge profile turns the corner, then glued, sealed and pulled tight with connector bolts underneath. A joint strip is a metal or colour-matched profile fixed and sealed between the two lengths. Either way, every cut edge, including the sink and hob cut-outs, is sealed so water cannot swell the core.

Kitchen worktop fitting in neighbouring towns

We also carry out kitchen worktop fitting in these towns near Brockley: