Kitchen worktop fitting in Dundee

Why kitchen worktop fitting for a Dundee home?

Some homeowners across Dundee and Angus have already ordered stone worktops from a supplier and need someone to fix and level the base units so templating can go ahead.

Homeowners in Dundee with sound units but worn, chipped or swollen laminate often replace just the worktops, keeping the rest of the kitchen as it is. We cover all of Dundee, including the DD1 postcode district, and travel out to neighbouring towns across Dundee and Angus.

What we cover for kitchen worktop fitting in Dundee

After the survey visit we write the scope down. For kitchen worktop fitting in Dundee it usually covers:

Solid wood oiled before and after fitting and fixed to allow seasonal movement
Quartz, granite or sintered stone templated once the base units are fixed and level
Free survey visit to measure the runs and check the base units are level
Undermount sink and hob cut-outs cut and finished by the stone fabricator
Matching upstands fitted and the joint to the wall sealed
Old worktops removed and taken away, with the sink and hob disconnected safely

Guide prices for kitchen worktop fitting in Dundee

These guide ranges include VAT at 20% and are adjusted for prices in Scotland. We confirm your price in writing after a free survey visit. Labour rates in Scotland are generally lower than in London and the South East, so these ranges are a little below the national guide.

Guide prices for kitchen worktop fitting in Dundee
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£470–£1,100
Solid wood worktops, supplied and fittedOiled before and after fitting	£850–£1,700
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£1,400–£3,000
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£1,700–£3,300
Old worktops removed and taken awayMore for stone	£80–£240

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

Kitchens in homes around Dundee

Typical homes in this part of Dundee and Angus include sandstone tenement flats, Victorian villas, post-war council-built houses and fishing town cottages. Dundee's tenement flats often have a narrow kitchen or a box room off the hall, while villas in Broughty Ferry and the Angus towns tend to have larger separate kitchens.

Dundee and Angus have soft mains water, so limescale is rarely an issue and taps and boiling water taps tend to stay free of heavy scale. Common stairs in tenements, steep streets in parts of Dundee and narrow glen roads in Angus can each affect deliveries and worktop lengths.

Building regulations, electrics and gas in Dundee

In Scotland, replacing worktops counts as replacing fitments, so it does not need a building warrant. Any electrical changes, such as new sockets above the worktop, must meet the building standards and BS 7671, and you should ask for an electrical certificate. Gas hobs must be disconnected and reconnected by a Gas Safe registered engineer, and a sink needing a new underground drain connection would need a warrant first.

Consent may be needed for new vents on listed buildings and in conservation areas, and homes in the upper Angus glens fall within the Cairngorms National Park.

Planning ahead

Plan the joint positions before ordering laminate, keeping them away from the sink and dishwasher, where water is most likely to sit.
If your Dundee and Angus home has uneven walls, ask how the worktop will be scribed so the back edge meets the wall without wide gaps.
For a Dundee kitchen with stone worktops, ask whether the upstands will be cut from the same slab so the colour and pattern match.
Solid wood needs regular re-oiling and should not be left with standing water around the sink, tap or kettle.

Questions about kitchen worktop fitting in Dundee

How much does kitchen worktop fitting cost in Dundee?

Kitchen worktop fitting in Dundee typically costs £470 to £1,100 including VAT for laminate worktops, supplied and fitted, based on prices in Scotland. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Dundee before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Dundee. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Will you fit stone worktops I have ordered myself?

Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.

How are laminate worktops joined at corners?

With either a mason's mitre or a joint strip. A mason's mitre is routed with a jig so the front edge profile turns the corner, then glued, sealed and pulled tight with connector bolts underneath. A joint strip is a metal or colour-matched profile fixed and sealed between the two lengths. Either way, every cut edge, including the sink and hob cut-outs, is sealed so water cannot swell the core.

How long does it take to fit new worktops?

Usually a day for laminate or solid wood in a typical kitchen, cut and jointed on site. Stone takes two visits: the fabricator templates once the base units are fixed and level, then cuts the worktops, the sink and hob openings and any drainer grooves, and fits them about one to two weeks later. In the meantime the sink is usually out of use, so plan meals around that gap.

Kitchen worktop fitting near Dundee

We also carry out kitchen worktop fitting in these towns near Dundee: