Kitchen plumbing in Reigate

Why kitchen plumbing for a Reigate home?

Plenty of Reigate kitchens still have the sink where it was put decades ago, and moving it under the window or into an island is a common reason to call a plumber.

If your Reigate home has a solid concrete ground floor, a new sink or appliance position may mean cutting a channel for the waste, which is worth planning before the units arrive. Our Surrey coverage reaches every part of Reigate (RH2) and out towards Redhill.

What does kitchen plumbing in Reigate include?

After the survey visit we write the scope down. For kitchen plumbing in Reigate it usually covers:

A survey of the stopcock, supply pipes, waste route and drain connection
Waste pipes laid to a steady fall, with an access point for clearing blockages
Dishwasher and washing machine supplies, with waste connections through suitable traps
Radiators moved or replaced so they clear the new units
A cold feed for a boiling water tap tank or a fridge with a water dispenser
Isolation valves on each tap and appliance feed for quick shut-off

Guide prices for kitchen plumbing in Reigate

These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

Guide prices for kitchen plumbing in Reigate
Typical project	Guide price
Sink, dishwasher and washing machine connectionsSupplies, valves and wastes in the new layout	£230–£580
Sink relocated, or new supplies for a boiling water tapNew pipe and waste runs	£460–£1,200
Waste run across a solid concrete floorChasing, pipework and reinstating the floor	£690–£1,700
Radiator moved or replacedDrain down, new pipework and refill	£290–£580

Guide ranges cover labour, pipework, fittings, valves and traps; the sink, tap and appliances themselves, any gas work and any building control or building warrant fees are not included. Prices include VAT at 20%.

What kind of kitchens do we fit in Reigate?

Typical homes in this part of Surrey include 1930s semis, Victorian and Edwardian villas, detached family houses and new-build estates. 1930s semis often have a narrow kitchen beside the dining room, while larger detached houses and Edwardian villas may have room for an island or a separate utility.

Private roads, long drives and village lanes can be awkward for large lorries, while town-centre flats may need lift bookings and parking permits for delivery day. Surrey's water is hard across most of the county, so limescale on taps and boiling water taps is common, and a scale-reducing filter is worth considering.

Regulations for kitchen work in Reigate

In England, kitchen pipework and fittings must meet the Water Supply (Water Fittings) Regulations 1999, which cover suitable materials, backflow protection and preventing waste or contamination of the supply. Connecting a sink to an existing waste or stack is routine, but a new connection to an underground drain, or a change to how waste water is discharged, involves building control. Gas pipework to a hob or cooker is separate work for a Gas Safe registered engineer.

Listed buildings and conservation areas in older towns and villages may need consent for new vents, and flats in managed blocks usually need the freeholder's consent first.

Getting the most from your kitchen plumbing

If your house in Surrey has a solid floor, ask at the survey where a waste could run before you settle on an island sink.
Plan a day or two without a working sink in your Reigate kitchen, and fill a few large bottles before the water goes off.
Ask for supplies and wastes to be positioned to suit each appliance's instructions, so hoses are short and do not kink.
Check your water pressure suits the tap you want, particularly a boiling water tap or a tall spray tap; the tap's instructions give its minimum.

Questions about kitchen plumbing in Reigate

How much does kitchen plumbing cost in Reigate?

Kitchen plumbing in Reigate typically costs £230 to £580 including VAT for connecting the sink, dishwasher and washing machine, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Reigate as well?

Yes. As well as Reigate itself, we cover the rest of Surrey and nearby towns such as Redhill and Horley. The process is the same wherever the kitchen is.

What happens to the old pipes during a kitchen refit?

Pipes that will no longer serve anything are cut back to the nearest live pipe and capped, rather than left as long dead ends behind the new units. Water sitting in an unused length of pipe can go stale, and a forgotten joint can leak where nobody will see it. Old wastes are removed or sealed so they cannot let drain smells back into the room.

Why should every appliance have an isolation valve?

An isolation valve lets you shut off the water to one tap or appliance without turning off the whole house. If a dishwasher hose splits or a tap needs a new cartridge, you turn a small screw or lever under the sink and the rest of the home keeps running. Valves are fitted on the hot and cold tap feeds and on each appliance supply.

Can a kitchen sink be moved to a different wall?

Yes, usually. The supplies are the easy part; the waste decides it, because it needs a steady fall all the way to the stack or drain. On a suspended timber floor the pipe can often run between the joists, while on solid concrete a channel may need to be cut and filled. Where a fall cannot be achieved, a pumped waste is sometimes considered.

Kitchen plumbing near Reigate

The same service is available a short drive from Reigate, including: