Kitchen plumbing · Hampshire
Kitchen plumbing in Fleet
Our kitchen plumbing service covers Fleet and nearby places such as Farnborough and Aldershot, with a free survey visit and an itemised written quote as the first step.
Why do people in Fleet choose kitchen plumbing?
Plenty of Fleet kitchens still have the sink where it was put decades ago, and moving it under the window or into an island is a common reason to call a plumber.
People adding a boiling water tap in Fleet usually need a fresh cold feed and room under the sink for the tank, planned alongside the sink unit. Homes right across Fleet are covered, as are nearby places such as Farnborough, Aldershot and the villages in between.
What is included in the work?
Your written quote lists everything included. For kitchen plumbing, that normally means:
- Isolation valves on each tap and appliance feed for quick shut-off
- Hot and cold supplies run to the new sink position
- A cold feed for a boiling water tap tank or a fridge with a water dispenser
- Radiators moved or replaced so they clear the new units
- A survey of the stopcock, supply pipes, waste route and drain connection
- Redundant pipes cut back to the live supply and capped, then a full leak check
How much does kitchen plumbing cost in Fleet?
As a starting point for Fleet, these ranges include VAT at 20% and allow for typical labour costs in the South East. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.
| Typical project | Guide price |
|---|---|
| Sink, dishwasher and washing machine connectionsSupplies, valves and wastes in the new layout | £230–£580 |
| Sink relocated, or new supplies for a boiling water tapNew pipe and waste runs | £460–£1,200 |
| Waste run across a solid concrete floorChasing, pipework and reinstating the floor | £690–£1,700 |
| Radiator moved or replacedDrain down, new pipework and refill | £290–£580 |
Guide ranges cover labour, pipework, fittings, valves and traps; the sink, tap and appliances themselves, any gas work and any building control or building warrant fees are not included. Prices include VAT at 20%.
What kind of kitchens do we fit in Fleet?
The housing mix across Hampshire includes Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages, so no two kitchen fits are quite alike. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.
Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help. Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle.
Regulations for kitchen work in Fleet
In England, kitchen pipework and fittings must meet the Water Supply (Water Fittings) Regulations 1999, which cover suitable materials, backflow protection and preventing waste or contamination of the supply. Connecting a sink to an existing waste or stack is routine, but a new connection to an underground drain, or a change to how waste water is discharged, involves building control. Gas pipework to a hob or cooker is separate work for a Gas Safe registered engineer.
Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.
Planning ahead
- Plan a day or two without a working sink in your Fleet kitchen, and fill a few large bottles before the water goes off.
- Ask for supplies and wastes to be positioned to suit each appliance's instructions, so hoses are short and do not kink.
- In a flat in Fleet, check your lease before moving the sink, as moving services usually needs the freeholder's written consent.
- Check your water pressure suits the tap you want, particularly a boiling water tap or a tall spray tap; the tap's instructions give its minimum.
Questions about kitchen plumbing in Fleet
How much does kitchen plumbing cost in Fleet?
For connecting the sink, dishwasher and washing machine, budget around £230 to £580 including VAT in Fleet. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.
Which parts of Fleet do you work in?
All of them. Our Hampshire coverage takes in the whole of Fleet, including the GU13, GU51 and GU52 postcode districts, as well as surrounding towns such as Farnborough. If you are unsure, send us your postcode.
Can a kitchen sink be moved to a different wall?
Yes, usually. The supplies are the easy part; the waste decides it, because it needs a steady fall all the way to the stack or drain. On a suspended timber floor the pipe can often run between the joists, while on solid concrete a channel may need to be cut and filled. Where a fall cannot be achieved, a pumped waste is sometimes considered.
What plumbing does a boiling water tap need?
A boiling water tap needs a cold supply to a tank under the sink, usually through a filter, plus an electrical socket or spur for the tank. Some models also take hot and cold feeds for the mixer side. The tank uses cupboard space, so the sink unit is planned around it, and the tap's minimum water pressure is checked against your supply.
What happens to the old pipes during a kitchen refit?
Pipes that will no longer serve anything are cut back to the nearest live pipe and capped, rather than left as long dead ends behind the new units. Water sitting in an unused length of pipe can go stale, and a forgotten joint can leak where nobody will see it. Old wastes are removed or sealed so they cannot let drain smells back into the room.
Kitchen plumbing in neighbouring towns
The same service is available a short drive from Fleet, including:
- Kitchen plumbing in Farnborough
- Kitchen plumbing in Aldershot
- Kitchen plumbing in Yateley
- Kitchen plumbing in Sandhurst
- Kitchen plumbing in Farnham
- Kitchen plumbing in Camberley
- Kitchen plumbing across Hampshire