Kitchen underfloor heating in Farnborough

Is kitchen underfloor heating right for your Farnborough kitchen?

Kitchen-diners across Hampshire often have a large stretch of open floor, which can suit a wet system run from the existing boiler or heat pump.

In a compact Farnborough kitchen with no room for a radiator at all, a plinth heater tucked under a base unit can be the simplest answer. We work throughout Farnborough (GU11) and across the wider Hampshire area.

What is in a typical job?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Screed, overlay boards or levelling compound, left to cure before finishes
Plinth heaters fitted under base units where wall space for a radiator is short
Door thresholds and plinth heights checked against the new floor build-up
Electric mats or cables, or wet pipework connected through a manifold
A new circuit or fused spur, plus a thermostat with a floor sensor
Insulation boards so the floor responds more quickly when the heating comes on

What does kitchen underfloor heating cost in Farnborough?

Use these ranges to plan your budget. They include VAT, reflect costs in the South East, and are firmed up once we have seen your Farnborough kitchen. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

What does kitchen underfloor heating cost in Farnborough?
Typical project	Guide price
Electric underfloor heating, kitchen floorMat or cable system, insulation board and thermostat	£690–£1,700
Wet underfloor heating, kitchen floorPipes, manifold, screed or overlay boards	£1,700–£4,600
Plinth heater fitted under a base unitElectric or hydronic, where wall space is short	£290–£690

Guide prices cover the heating system, insulation boards, controls and connection with testing; the floor finish, subfloor repairs, a consumer unit upgrade and any boiler or heat pump changes are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Farnborough?

You will find Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages throughout Hampshire. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help. Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle.

Building regulations, electrics and gas in Farnborough

In England, electric underfloor heating needs a supply and a thermostat. A new dedicated circuit is notifiable under Part P and is certified through a competent person scheme or building control, while a fused spur from an existing circuit is not notifiable in England but must still meet BS 7671 and be certified. A wet system is joined to your existing heating, and any work on a gas boiler is for a Gas Safe registered engineer.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Tips before you start

Ask for the floor sensor position to be recorded and the thermostat set to the finish's limits before the heating is first used in your Farnborough kitchen.
Choose your floor finish first and check its maximum surface temperature, as it decides the thermostat setting and the type of system.
If your Farnborough home has a suspended timber floor, ask how the heating will be supported and insulated between the joists.
If the floor is small and there is no wall space for a radiator, a plinth heater under a base unit may be simpler.

Questions about kitchen underfloor heating in Farnborough

How much does kitchen underfloor heating cost in Farnborough?

Guide prices in Farnborough are about £690 to £1,700 including VAT for electric underfloor heating for a kitchen floor. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Can you measure up in Farnborough before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Farnborough. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Which floor finishes work with underfloor heating?

Porcelain and ceramic tiles work well, because they conduct heat and cope with temperature changes. Luxury vinyl tiles and engineered wood can also be used, but their manufacturers set a maximum surface temperature, so the thermostat needs a floor sensor and a limit set to match. Thick underlays and rugs reduce the heat reaching the room, so check the finish's installation guidance before ordering.

Is electric or wet underfloor heating better for a kitchen?

It depends on the floor and the heating you already have. Electric mats are thin, quick to lay and suit a single kitchen floor during a refit. Wet systems use warm water from the boiler or heat pump, need more floor depth and a manifold, and make more sense when a larger area, such as a whole kitchen-diner floor, is being relaid at the same time.

Will underfloor heating raise my kitchen floor?

Usually, yes. An electric mat with insulation board and tile adhesive adds a modest height, while a wet system in screed adds more. The new level affects door thresholds, the gap under integrated appliances and plinth heights, so it is measured at the survey and the units are set to suit. Low-profile overlay boards can reduce the rise where height is tight.

Kitchen underfloor heating in neighbouring towns

We also carry out kitchen underfloor heating in these towns near Farnborough: