Splashbacks and tiling in Wrexham

Who usually needs splashbacks and tiling in Wrexham?

Many people in Clwyd choose a single panel of toughened glass behind the hob because it wipes clean quickly and has no grout lines to hold grease.

Homeowners in Wrexham often add a splashback as the final stage of a new kitchen, once the worktops are in and the bare wall above them needs a washable finish. If your home is in Wrexham or close by in Rhosllannerchrugog or Buckley, the same survey, quote and fitting process applies.

What does the job involve?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Stone upstands and splashbacks templated and fitted alongside a stone worktop
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Tiled splashbacks between the worktop and wall units, set out from a centre line
Old tiles removed and walls prepared, patched or boarded where needed
Free survey visit to check the walls, agree the layout and give an itemised quote
Full-height or feature tiling behind the hob, sink or open shelving

Splashbacks and tiling prices in Wrexham

These guide ranges include VAT at 20% and are adjusted for prices in Wales. We confirm your price in writing after a free survey visit. Costs across Wales tend to sit under UK averages, which these ranges reflect.

Splashbacks and tiling prices in Wrexham
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£140–£370
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£280–£740
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£230–£550
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Local homes and their kitchens

In and around Wrexham, homes range across Victorian terraces, stone cottages, seaside bungalows and post-war council-built houses. Terraced houses in Wrexham and Rhyl often have a narrow back kitchen, while bungalows along the coast tend to have a compact square kitchen.

Hill villages, farm tracks and coastal flats without lifts can complicate deliveries, so the route for long worktops is checked when the kitchen is surveyed. Hardness varies across Clwyd, so check with your supplier; where water is softer, taps and boiling water taps suffer much less limescale.

Do you need approval for splashbacks and tiling in Wrexham?

In Wales, splashbacks and tiling need no planning permission or building regulations approval. Electrical changes are different: because Part P in Wales treats extending an existing circuit within a kitchen as notifiable, moving or adding a socket to suit new tiling is normally notifiable work, certified through a competent person scheme or building control. In a listed building, listed building consent may be needed before historic tiles or features are removed.

A straightforward kitchen fit needs no planning permission, though listed buildings and conservation areas in older towns and villages may need consent for a new external vent.

Getting the most from your splashbacks and tiling

Give fresh grout and sealant the full curing time shown on the packaging before scrubbing them or letting water sit on the joint at the back of the worktop.
Keep the tile boxes until the job is finished and note the batch number, so matching replacements can be found if a tile cracks later.
Clear the worktop and empty the nearest wall cupboards before the tiler arrives at your Wrexham home, as cutting dust and adhesive travel further than you expect.
Agree socket, switch and cooker hood positions before tiling starts; moving them afterwards means cutting tiles out and patching in replacements that may not match.

Questions about splashbacks and tiling in Wrexham

How much do splashbacks and tiling cost in Wrexham?

For a tiled splashback, budget around £140 to £370 including VAT in Wrexham. That reflects typical costs in Wales; we confirm the actual figure in writing once we have measured up.

Do you cover all of Wrexham?

Yes. We work across Wrexham, including the LL13 postcode district, and nearby towns such as Rhosllannerchrugog and Buckley. Book a free survey visit and we will arrange a time that suits you.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Can you tile over existing kitchen tiles?

Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.

Splashbacks and tiling in neighbouring towns

The same service is available a short drive from Wrexham, including: