Splashbacks and tiling in Deeside

Why splashbacks and tiling for a Deeside home?

If your Deeside home is an older property with uneven walls, the splashback may start with patching, skimming or boarding so the tiler has a flat surface to work from.

Homeowners in Deeside often add a splashback as the final stage of a new kitchen, once the worktops are in and the bare wall above them needs a washable finish. Deeside sits about 11 miles north of Wrexham, and our Clwyd coverage takes in everything in between.

What do splashbacks and tiling in Deeside include?

The exact scope is agreed after the survey, but a typical job in Deeside covers:

Full-height or feature tiling behind the hob, sink or open shelving
Socket and switch plates refitted by an electrician once the tiling is finished
Old tiles removed and walls prepared, patched or boarded where needed
Free survey visit to check the walls, agree the layout and give an itemised quote
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs

Guide prices for splashbacks and tiling in Deeside

Typical splashbacks and tiling prices for homes in Deeside, including VAT and adjusted for Wales. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices in Wales usually come in below the national guide, as labour rates are lower than in the South East.

Guide prices for splashbacks and tiling in Deeside
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£140–£370
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£280–£740
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£230–£550
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Fitting kitchens in older and newer Deeside homes

The housing mix across Clwyd includes Victorian terraces, stone cottages, seaside bungalows and post-war council-built houses, so no two kitchen fits are quite alike. Terraced houses in Wrexham and Rhyl often have a narrow back kitchen, while bungalows along the coast tend to have a compact square kitchen.

Hill villages, farm tracks and coastal flats without lifts can complicate deliveries, so the route for long worktops is checked when the kitchen is surveyed. Hardness varies across Clwyd, so check with your supplier; where water is softer, taps and boiling water taps suffer much less limescale.

Do you need approval for splashbacks and tiling in Deeside?

In Wales, splashbacks and tiling need no planning permission or building regulations approval. Electrical changes are different: because Part P in Wales treats extending an existing circuit within a kitchen as notifiable, moving or adding a socket to suit new tiling is normally notifiable work, certified through a competent person scheme or building control. In a listed building, listed building consent may be needed before historic tiles or features are removed.

A straightforward kitchen fit needs no planning permission, though listed buildings and conservation areas in older towns and villages may need consent for a new external vent.

Worth knowing before the fit

Choosing stone worktops for a Deeside kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
Clear the worktop and empty the nearest wall cupboards before the tiler arrives at your Deeside home, as cutting dust and adhesive travel further than you expect.
Keep the tile boxes until the job is finished and note the batch number, so matching replacements can be found if a tile cracks later.
Toughened glass cannot be cut once it is made, so it is measured after the worktops are fixed and every socket position is final.

Questions about splashbacks and tiling in Deeside

How much do splashbacks and tiling cost in Deeside?

Splashbacks and tiling in Deeside typically cost £140 to £370 including VAT for a tiled splashback, based on prices in Wales. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Deeside?

Yes. We work across Deeside, including the CH5 postcode district, and nearby towns such as Hawarden and Buckley. Book a free survey visit and we will arrange a time that suits you.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Can you tile over existing kitchen tiles?

Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Splashbacks and tiling in neighbouring towns

Neighbouring towns where we offer splashbacks and tiling: