Splashbacks and tiling in Flint

Is splashbacks and tiling right for your Flint kitchen?

If the units in your Flint kitchen are already fitted and only the walls are unfinished, we can take on the tiling or splashback as a job on its own.

Homeowners in Flint often add a splashback as the final stage of a new kitchen, once the worktops are in and the bare wall above them needs a washable finish. We work throughout Flint (CH6) and across the wider Clwyd area.

What we cover for splashbacks and tiling in Flint

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Tiled splashbacks between the worktop and wall units, set out from a centre line
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Socket and switch plates refitted by an electrician once the tiling is finished
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Free survey visit to check the walls, agree the layout and give an itemised quote
Full-height or feature tiling behind the hob, sink or open shelving

What should you budget for splashbacks and tiling in Flint?

Typical splashbacks and tiling prices for homes in Flint, including VAT and adjusted for Wales. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour rates in Wales are generally lower than in London and the South East, so these ranges are a little below the national guide.

What should you budget for splashbacks and tiling in Flint?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£140–£370
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£280–£740
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£230–£550
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

What kind of kitchens do we fit in Flint?

In and around Flint, homes range across Victorian terraces, stone cottages, seaside bungalows and post-war council-built houses. Terraced houses in Wrexham and Rhyl often have a narrow back kitchen, while bungalows along the coast tend to have a compact square kitchen.

Hill villages, farm tracks and coastal flats without lifts can complicate deliveries, so the route for long worktops is checked when the kitchen is surveyed. Hardness varies across Clwyd, so check with your supplier; where water is softer, taps and boiling water taps suffer much less limescale.

Regulations for kitchen work in Flint

In Wales, splashbacks and tiling need no planning permission or building regulations approval. Electrical changes are different: because Part P in Wales treats extending an existing circuit within a kitchen as notifiable, moving or adding a socket to suit new tiling is normally notifiable work, certified through a competent person scheme or building control. In a listed building, listed building consent may be needed before historic tiles or features are removed.

A straightforward kitchen fit needs no planning permission, though listed buildings and conservation areas in older towns and villages may need consent for a new external vent.

Planning ahead

If you are renting out a flat in Flint, a single glass panel or large plain tiles cut down the grout that needs cleaning at each check-out.
Choosing stone worktops for a Flint kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
Give fresh grout and sealant the full curing time shown on the packaging before scrubbing them or letting water sit on the joint at the back of the worktop.
Agree socket, switch and cooker hood positions before tiling starts; moving them afterwards means cutting tiles out and patching in replacements that may not match.

Questions about splashbacks and tiling in Flint

How much do splashbacks and tiling cost in Flint?

Splashbacks and tiling in Flint typically cost £140 to £370 including VAT for a tiled splashback, based on prices in Wales. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Flint do you work in?

All of them. Our Clwyd coverage takes in the whole of Flint, including the CH6 postcode district, as well as surrounding towns such as Deeside. If you are unsure, send us your postcode.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Can you tile over existing kitchen tiles?

Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.

Nearby places we cover

We also carry out splashbacks and tiling in these towns near Flint: