Splashbacks and tiling in Tooting

Is splashbacks and tiling right for your Tooting kitchen?

If the kitchen in your Tooting home is sound but the tiles are dated, cracked or stained, a new splashback is one of the simplest ways to refresh it without replacing units.

If the units in your Tooting kitchen are already fitted and only the walls are unfinished, we can take on the tiling or splashback as a job on its own. Tooting sits about 5 miles south of Westminster, and our Greater London coverage takes in everything in between.

What is in a typical job?

Here is what usually goes into splashbacks and tiling, adjusted to your Tooting kitchen after we have measured it:

Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Old tiles removed and walls prepared, patched or boarded where needed
Socket and switch plates refitted by an electrician once the tiling is finished
Tiled splashbacks between the worktop and wall units, set out from a centre line
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Full-height or feature tiling behind the hob, sink or open shelving

Guide prices for splashbacks and tiling in Tooting

Use these ranges to plan your budget. They include VAT, reflect costs in London, and are firmed up once we have seen your Tooting kitchen. Prices in London usually run above the national guide, mainly because labour and parking cost more.

Guide prices for splashbacks and tiling in Tooting
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£200–£520
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£390–£1,000
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£320–£780
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

What kind of kitchens do we fit in Tooting?

In and around Tooting, homes range across Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

What rules apply to splashbacks and tiling in Tooting?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Planning ahead

Keep the tile boxes until the job is finished and note the batch number, so matching replacements can be found if a tile cracks later.
Clear the worktop and empty the nearest wall cupboards before the tiler arrives at your Tooting home, as cutting dust and adhesive travel further than you expect.
Hold a few of your chosen tiles against the wall in your Tooting kitchen, in daylight and under the kitchen lights, before ordering the full quantity.
Agree socket, switch and cooker hood positions before tiling starts; moving them afterwards means cutting tiles out and patching in replacements that may not match.

Questions about splashbacks and tiling in Tooting

How much do splashbacks and tiling cost in Tooting?

Guide prices in Tooting are about £200 to £520 including VAT for a tiled splashback. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover all of Tooting?

Yes. We work across Tooting, including the SW17 postcode district, and nearby towns such as Streatham and Mitcham. Book a free survey visit and we will arrange a time that suits you.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Also covering nearby towns

The same service is available a short drive from Tooting, including: