Splashbacks and tiling in Mitcham

Why do people in Mitcham choose splashbacks and tiling?

If the kitchen in your Mitcham home is sound but the tiles are dated, cracked or stained, a new splashback is one of the simplest ways to refresh it without replacing units.

Landlords around Greater London often prefer plain tiles with mid-grey grout or a glass panel, since both stand up to heavy use and are quick to clean between tenancies. Our Greater London coverage reaches every part of Mitcham (CR4) and out towards Morden.

What is included in the work?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Old tiles removed and walls prepared, patched or boarded where needed
Tiled splashbacks between the worktop and wall units, set out from a centre line
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Full-height or feature tiling behind the hob, sink or open shelving
Free survey visit to check the walls, agree the layout and give an itemised quote
Socket and switch plates refitted by an electrician once the tiling is finished

Guide prices for splashbacks and tiling in Mitcham

Use these ranges to plan your budget. They include VAT, reflect costs in London, and are firmed up once we have seen your Mitcham kitchen. Labour in London generally costs more than the UK average, which lifts these ranges a little.

Guide prices for splashbacks and tiling in Mitcham
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£200–£520
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£390–£1,000
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£320–£780
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Local homes and their kitchens

In and around Mitcham, homes range across Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Do you need approval for splashbacks and tiling in Mitcham?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Planning ahead

Clear the worktop and empty the nearest wall cupboards before the tiler arrives at your Mitcham home, as cutting dust and adhesive travel further than you expect.
If you are renting out a flat in Mitcham, a single glass panel or large plain tiles cut down the grout that needs cleaning at each check-out.
If your Greater London kitchen has a gas hob, check the hob instructions for splashback clearances before choosing glass or tiles for the wall behind it.
Heavy tiles, such as large porcelain or natural stone, may need a stronger backing board and a suitable adhesive, so have the wall checked first.

Questions about splashbacks and tiling in Mitcham

How much do splashbacks and tiling cost in Mitcham?

Guide prices in Mitcham are about £200 to £520 including VAT for a tiled splashback. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Can you measure up in Mitcham before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Mitcham. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Also covering nearby towns

The same service is available a short drive from Mitcham, including: