Splashbacks and tiling in Selby

Is splashbacks and tiling right for your Selby kitchen?

If your Selby home is an older property with uneven walls, the splashback may start with patching, skimming or boarding so the tiler has a flat surface to work from.

If the kitchen in your Selby home is sound but the tiles are dated, cracked or stained, a new splashback is one of the simplest ways to refresh it without replacing units. We cover all of Selby, including the YO8 postcode district, and travel out to neighbouring towns across North Yorkshire.

What do splashbacks and tiling in Selby include?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Old tiles removed and walls prepared, patched or boarded where needed
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Tiled splashbacks between the worktop and wall units, set out from a centre line
Free survey visit to check the walls, agree the layout and give an itemised quote
Socket and switch plates refitted by an electrician once the tiling is finished
Full-height or feature tiling behind the hob, sink or open shelving

What do splashbacks and tiling cost in Selby?

Typical splashbacks and tiling prices for homes in Selby, including VAT and adjusted for Yorkshire and the Humber. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour rates in Yorkshire and the Humber are generally lower than in London and the South East, so these ranges are a little below the national guide.

What do splashbacks and tiling cost in Selby?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£140–£380
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£280–£760
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£240–£570
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Kitchens in homes around Selby

In and around Selby, homes range across stone-built cottages, Victorian terraces, Georgian townhouses and post-war semis. Dales and moorland stone cottages often have a small kitchen in a rear extension, while terraces in York and Middlesbrough tend to have a narrow back galley.

Dales and moorland roads can be narrow and steep, and older streets in York can have restricted parking, so delivery vehicles and timing need planning. Water hardness varies across North Yorkshire, from soft in some upland areas to moderately hard elsewhere, so check with your supplier before choosing a filter.

Do you need approval for splashbacks and tiling in Selby?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Homes in the Yorkshire Dales or North York Moors national parks, York's many listed buildings and conservation areas may need consent for new vents or internal changes.

Planning ahead

If you are renting out a flat in Selby, a single glass panel or large plain tiles cut down the grout that needs cleaning at each check-out.
Clear the worktop and empty the nearest wall cupboards before the tiler arrives at your Selby home, as cutting dust and adhesive travel further than you expect.
Choosing stone worktops for a Selby kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
Order spare tiles from the same batch to cover cuts and breakages, and keep a few back so a later repair matches.

Questions about splashbacks and tiling in Selby

How much do splashbacks and tiling cost in Selby?

Splashbacks and tiling in Selby typically cost £140 to £380 including VAT for a tiled splashback, based on prices in Yorkshire and the Humber. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Selby?

Yes. We work across Selby, including the YO8 postcode district, and nearby towns such as Goole and Pontefract. Book a free survey visit and we will arrange a time that suits you.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

Nearby places we cover

Neighbouring towns where we offer splashbacks and tiling: