Kitchen worktop fitting in Selby

Thinking about kitchen worktop fitting in Selby?

If your North Yorkshire kitchen still has a dated tiled or laminate surface, new worktops often go in with a new sink, tap and splashback at the same time.

Households in Selby who cook a lot often want a harder-wearing surface near the hob, such as quartz, sintered stone or compact laminate, that copes with daily use. Selby sits about 12 miles south of York, and our North Yorkshire coverage takes in everything in between.

What is in a typical job?

Your written quote lists everything included. For kitchen worktop fitting, that normally means:

Quartz, granite or sintered stone templated once the base units are fixed and level
Solid wood oiled before and after fitting and fixed to allow seasonal movement
Undermount sink and hob cut-outs cut and finished by the stone fabricator
Matching upstands fitted and the joint to the wall sealed
Old worktops removed and taken away, with the sink and hob disconnected safely
Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers

What should you budget for kitchen worktop fitting in Selby?

Typical kitchen worktop fitting prices for homes in Selby, including VAT and adjusted for Yorkshire and the Humber. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices in Yorkshire and the Humber usually come in below the national guide, as labour rates are lower than in the South East.

What should you budget for kitchen worktop fitting in Selby?
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£480–£1,100
Solid wood worktops, supplied and fittedOiled before and after fitting	£860–£1,700
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£1,400–£3,000
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£1,700–£3,300
Old worktops removed and taken awayMore for stone	£80–£240

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

What kind of kitchens do we fit in Selby?

In and around Selby, homes range across stone-built cottages, Victorian terraces, Georgian townhouses and post-war semis. Dales and moorland stone cottages often have a small kitchen in a rear extension, while terraces in York and Middlesbrough tend to have a narrow back galley.

Water hardness varies across North Yorkshire, from soft in some upland areas to moderately hard elsewhere, so check with your supplier before choosing a filter. Dales and moorland roads can be narrow and steep, and older streets in York can have restricted parking, so delivery vehicles and timing need planning.

Building regulations, electrics and gas in Selby

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Homes in the Yorkshire Dales or North York Moors national parks, York's many listed buildings and conservation areas may need consent for new vents or internal changes.

Tips before you start

If your Selby kitchen has a gas hob, a Gas Safe registered engineer needs to disconnect it before the old worktops come off.
Plan the joint positions before ordering laminate, keeping them away from the sink and dishwasher, where water is most likely to sit.
Before templating day at your Selby home, make sure the sink, tap and hob are on site so the stone can be cut to them.
Solid wood needs regular re-oiling and should not be left with standing water around the sink, tap or kettle.

Questions about kitchen worktop fitting in Selby

How much does kitchen worktop fitting cost in Selby?

Kitchen worktop fitting in Selby typically costs £480 to £1,100 including VAT for laminate worktops, supplied and fitted, based on prices in Yorkshire and the Humber. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Selby before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Selby. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

How are laminate worktops joined at corners?

With either a mason's mitre or a joint strip. A mason's mitre is routed with a jig so the front edge profile turns the corner, then glued, sealed and pulled tight with connector bolts underneath. A joint strip is a metal or colour-matched profile fixed and sealed between the two lengths. Either way, every cut edge, including the sink and hob cut-outs, is sealed so water cannot swell the core.

Will you fit stone worktops I have ordered myself?

Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.

How long does it take to fit new worktops?

Usually a day for laminate or solid wood in a typical kitchen, cut and jointed on site. Stone takes two visits: the fabricator templates once the base units are fixed and level, then cuts the worktops, the sink and hob openings and any drainer grooves, and fits them about one to two weeks later. In the meantime the sink is usually out of use, so plan meals around that gap.

Also covering nearby towns

Close to Selby? We cover these nearby towns too: