Splashbacks and tiling · England
Splashbacks and tiling in Lincolnshire
Homeowners and landlords across Lincolnshire can book us for splashbacks and tiling: tiled, glass and stone splashbacks and wall tiling, fitted once the worktops and sockets are in.
Why splashbacks and tiling for a Lincolnshire home?
Many people in Lincolnshire choose a single panel of toughened glass behind the hob because it wipes clean quickly and has no grout lines to hold grease.
If the kitchen in your Lincolnshire home is sound but the tiles are dated, cracked or stained, a new splashback is one of the simplest ways to refresh it without replacing units.
What do splashbacks and tiling in Lincolnshire include?
Here is what usually goes into splashbacks and tiling, adjusted to your Lincolnshire kitchen after we have measured it:
- Free survey visit to check the walls, agree the layout and give an itemised quote
- Old tiles removed and walls prepared, patched or boarded where needed
- Tiled splashbacks between the worktop and wall units, set out from a centre line
- Full-height or feature tiling behind the hob, sink or open shelving
- Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
- Stone upstands and splashbacks templated and fitted alongside a stone worktop
- Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
- Socket and switch plates refitted by an electrician once the tiling is finished
How much do splashbacks and tiling cost in Lincolnshire?
Use these ranges to plan your budget. They include VAT, reflect costs in the East Midlands, and are firmed up once we have seen your Lincolnshire kitchen. For the East Midlands, these ranges are close to the national figures.
| Typical project | Guide price |
|---|---|
| Tiled splashbackBetween worktop and wall units | £150–£390 |
| Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting | £290–£780 |
| Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in | £240–£580 |
| Stone upstands and splashbacksTemplated with the worktop | Priced with the worktop |
Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.
Kitchens in homes across Lincolnshire
Across Lincolnshire you will often find Victorian terraces, post-war council-built houses, farmhouses and seaside bungalows, and each shapes the kitchen differently. Expect a narrow back kitchen in many Victorian terraces in Lincoln and Grimsby, while bungalows on the coast and in villages usually have a simple square kitchen.
Lincolnshire's mains water is mostly hard, so limescale on taps, sinks and boiling water taps is common, and a scale-reducing filter is a sensible addition. Long rural roads and farm tracks can affect delivery times and vehicle size, while terraced streets in the towns may have little parking near the front door.
Bungalow refits are common, often with lower-maintenance surfaces, more drawers and a layout planned for easier living. Farmhouse kitchens tend to be large, and owners often want a range cooker, an island or table and a separate utility for boots and laundry.
Rules for splashbacks and tiling in Lincolnshire
Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.
Fitting a kitchen needs no planning permission, but listed buildings in historic town centres and homes in conservation areas may need consent for new vents.
Before you start
- Order spare tiles from the same batch to cover cuts and breakages, and keep a few back so a later repair matches.
- Pale grout behind a hob or sink shows stains quickly; a mid-grey or stain-resistant grout in narrow joints is easier to keep looking fresh.
- Heavy tiles, such as large porcelain or natural stone, may need a stronger backing board and a suitable adhesive, so have the wall checked first.
- Toughened glass cannot be cut once it is made, so it is measured after the worktops are fixed and every socket position is final.
- Clear the worktop and empty the nearest wall cupboards before the tiler arrives at your Lincolnshire home, as cutting dust and adhesive travel further than you expect.
- Choosing stone worktops for a Lincolnshire kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
Questions about splashbacks and tiling in Lincolnshire
How much do splashbacks and tiling cost in Lincolnshire?
Splashbacks and tiling in Lincolnshire typically cost £150 to £390 including VAT for a tiled splashback, based on prices in the East Midlands. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover the whole of Lincolnshire?
Yes. We carry out splashbacks and tiling across Lincolnshire, including Lincoln, Grimsby, Scunthorpe and Boston. Every job starts with a free survey visit and an itemised written quote.
When are splashbacks fitted during a kitchen installation?
Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.
Can a glass splashback go behind a gas hob?
Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.
Can you tile over existing kitchen tiles?
Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.
Splashbacks and tiling in towns across Lincolnshire
Choose a town for local guide prices and postcode coverage:
- Splashbacks and tiling in Lincoln
- Splashbacks and tiling in Grimsby
- Splashbacks and tiling in Scunthorpe
- Splashbacks and tiling in Boston
- Splashbacks and tiling in Grantham
- Splashbacks and tiling in Cleethorpes
- Splashbacks and tiling in Spalding
- Splashbacks and tiling in Skegness
- Splashbacks and tiling in Stamford
- Splashbacks and tiling in Gainsborough
- Splashbacks and tiling in Louth
- Splashbacks and tiling in Sleaford
- Splashbacks and tiling in Bourne
- Splashbacks and tiling in Horncastle