Splashbacks and tiling in Pembroke Dock

When do splashbacks and tiling make sense in Pembroke Dock?

If your Pembroke Dock home is an older property with uneven walls, the splashback may start with patching, skimming or boarding so the tiler has a flat surface to work from.

When a Pembroke Dock kitchen is getting stone worktops, upstands or a matching splashback are usually planned at the same time, so they are templated in one visit. We work throughout Pembroke Dock (SA72) and across the wider Dyfed area.

What we cover for splashbacks and tiling in Pembroke Dock

Here is what usually goes into splashbacks and tiling, adjusted to your Pembroke Dock kitchen after we have measured it:

Stone upstands and splashbacks templated and fitted alongside a stone worktop
Free survey visit to check the walls, agree the layout and give an itemised quote
Full-height or feature tiling behind the hob, sink or open shelving
Socket and switch plates refitted by an electrician once the tiling is finished
Tiled splashbacks between the worktop and wall units, set out from a centre line
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint

What do splashbacks and tiling cost in Pembroke Dock?

As a starting point for Pembroke Dock, these ranges include VAT at 20% and allow for typical labour costs in Wales. Prices in Wales usually come in below the national guide, as labour rates are lower than in the South East.

What do splashbacks and tiling cost in Pembroke Dock?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£140–£370
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£280–£740
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£230–£550
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Fitting kitchens in older and newer Pembroke Dock homes

Across Dyfed you will often find stone cottages, Victorian terraces, farmhouses and post-war bungalows, and each shapes the kitchen differently. Stone cottages and farmhouses often have a small kitchen in a rear extension, while terraces in Llanelli and Aberystwyth tend to have a narrow galley at the back.

Mains water across most of Dyfed is soft, so limescale is rarely a big problem, though farms on private supplies may need their own filtering. Rural farm tracks, steep coastal lanes and long distances between villages can affect delivery vehicles, so worktop lengths and timing need planning ahead.

Do you need approval for splashbacks and tiling in Pembroke Dock?

In Wales, splashbacks and tiling need no planning permission or building regulations approval. Electrical changes are different: because Part P in Wales treats extending an existing circuit within a kitchen as notifiable, moving or adding a socket to suit new tiling is normally notifiable work, certified through a competent person scheme or building control. In a listed building, listed building consent may be needed before historic tiles or features are removed.

Homes in the Pembrokeshire Coast National Park or Bannau Brycheiniog, listed cottages and conservation areas may need consent for a new external vent or historic alterations.

Worth knowing before the fit

Clear the worktop and empty the nearest wall cupboards before the tiler arrives at your Pembroke Dock home, as cutting dust and adhesive travel further than you expect.
Ask to see where the tiling will start before the first row goes on in your Pembroke Dock kitchen, so narrow cut tiles end up in corners rather than on show.
Hold a few of your chosen tiles against the wall in your Pembroke Dock kitchen, in daylight and under the kitchen lights, before ordering the full quantity.
Toughened glass cannot be cut once it is made, so it is measured after the worktops are fixed and every socket position is final.

Questions about splashbacks and tiling in Pembroke Dock

How much do splashbacks and tiling cost in Pembroke Dock?

Guide prices in Pembroke Dock are about £140 to £370 including VAT for a tiled splashback. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Can you measure up in Pembroke Dock before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Pembroke Dock. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

Also covering nearby towns

Close to Pembroke Dock? We cover these nearby towns too: