Splashbacks and tiling in Milford Haven

Why do people in Milford Haven choose splashbacks and tiling?

Many people in Dyfed choose a single panel of toughened glass behind the hob because it wipes clean quickly and has no grout lines to hold grease.

When a Milford Haven kitchen is getting stone worktops, upstands or a matching splashback are usually planned at the same time, so they are templated in one visit. Homes right across Milford Haven are covered, as are nearby places such as Pembroke Dock, Haverfordwest and the villages in between.

What does the job involve?

Here is what usually goes into splashbacks and tiling, adjusted to your Milford Haven kitchen after we have measured it:

Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Socket and switch plates refitted by an electrician once the tiling is finished
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Tiled splashbacks between the worktop and wall units, set out from a centre line
Full-height or feature tiling behind the hob, sink or open shelving
Free survey visit to check the walls, agree the layout and give an itemised quote

What should you budget for splashbacks and tiling in Milford Haven?

The figures below are guide prices for Milford Haven, including VAT and adjusted for typical costs across Wales. The fixed price comes after we have measured up. Prices in Wales usually come in below the national guide, as labour rates are lower than in the South East.

What should you budget for splashbacks and tiling in Milford Haven?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£140–£370
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£280–£740
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£230–£550
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

House types around Milford Haven and what they mean for a kitchen

Typical homes in this part of Dyfed include stone cottages, Victorian terraces, farmhouses and post-war bungalows. Stone cottages and farmhouses often have a small kitchen in a rear extension, while terraces in Llanelli and Aberystwyth tend to have a narrow galley at the back.

Mains water across most of Dyfed is soft, so limescale is rarely a big problem, though farms on private supplies may need their own filtering. Rural farm tracks, steep coastal lanes and long distances between villages can affect delivery vehicles, so worktop lengths and timing need planning ahead.

What rules apply to splashbacks and tiling in Milford Haven?

In Wales, splashbacks and tiling need no planning permission or building regulations approval. Electrical changes are different: because Part P in Wales treats extending an existing circuit within a kitchen as notifiable, moving or adding a socket to suit new tiling is normally notifiable work, certified through a competent person scheme or building control. In a listed building, listed building consent may be needed before historic tiles or features are removed.

Homes in the Pembrokeshire Coast National Park or Bannau Brycheiniog, listed cottages and conservation areas may need consent for a new external vent or historic alterations.

Worth knowing before the fit

Choosing stone worktops for a Milford Haven kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
Clear the worktop and empty the nearest wall cupboards before the tiler arrives at your Milford Haven home, as cutting dust and adhesive travel further than you expect.
Ask to see where the tiling will start before the first row goes on in your Milford Haven kitchen, so narrow cut tiles end up in corners rather than on show.
Toughened glass cannot be cut once it is made, so it is measured after the worktops are fixed and every socket position is final.

Questions about splashbacks and tiling in Milford Haven

How much do splashbacks and tiling cost in Milford Haven?

Guide prices in Milford Haven are about £140 to £370 including VAT for a tiled splashback. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Milford Haven as well?

Yes. As well as Milford Haven itself, we cover the rest of Dyfed and nearby towns such as Pembroke Dock and Haverfordwest. The process is the same wherever the kitchen is.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

Nearby places we cover

Neighbouring towns where we offer splashbacks and tiling: