Splashbacks and tiling in Lincoln

What prompts splashbacks and tiling in Lincoln?

Some households in Lincolnshire want tiling taken up to the ceiling behind a range cooker or open shelving, turning one whole wall into a practical feature that is easy to wipe down.

Landlords around Lincolnshire often prefer plain tiles with mid-grey grout or a glass panel, since both stand up to heavy use and are quick to clean between tenancies. We work throughout Lincoln (LN2) and across the wider Lincolnshire area.

What is in a typical job?

After the survey visit we write the scope down. For splashbacks and tiling in Lincoln it usually covers:

Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Full-height or feature tiling behind the hob, sink or open shelving
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Free survey visit to check the walls, agree the layout and give an itemised quote
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Socket and switch plates refitted by an electrician once the tiling is finished

Guide prices for splashbacks and tiling in Lincoln

As a starting point for Lincoln, these ranges include VAT at 20% and allow for typical labour costs in the East Midlands. For the East Midlands, these ranges are close to the national figures.

Guide prices for splashbacks and tiling in Lincoln
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£150–£390
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£290–£780
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£240–£580
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Kitchens in homes around Lincoln

The housing mix across Lincolnshire includes Victorian terraces, post-war council-built houses, farmhouses and seaside bungalows, so no two kitchen fits are quite alike. Expect a narrow back kitchen in many Victorian terraces in Lincoln and Grimsby, while bungalows on the coast and in villages usually have a simple square kitchen.

Long rural roads and farm tracks can affect delivery times and vehicle size, while terraced streets in the towns may have little parking near the front door. Lincolnshire's mains water is mostly hard, so limescale on taps, sinks and boiling water taps is common, and a scale-reducing filter is a sensible addition.

Do you need approval for splashbacks and tiling in Lincoln?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Fitting a kitchen needs no planning permission, but listed buildings in historic town centres and homes in conservation areas may need consent for new vents.

Tips before you start

If you are renting out a flat in Lincoln, a single glass panel or large plain tiles cut down the grout that needs cleaning at each check-out.
Choosing stone worktops for a Lincoln kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
If your Lincolnshire kitchen has a gas hob, check the hob instructions for splashback clearances before choosing glass or tiles for the wall behind it.
Order spare tiles from the same batch to cover cuts and breakages, and keep a few back so a later repair matches.

Questions about splashbacks and tiling in Lincoln

How much do splashbacks and tiling cost in Lincoln?

Guide prices in Lincoln are about £150 to £390 including VAT for a tiled splashback. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover all of Lincoln?

Yes. We work across Lincoln, including the LN2 postcode district, and nearby towns such as Gainsborough and Newark-on-Trent. Book a free survey visit and we will arrange a time that suits you.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Also covering nearby towns

Close to Lincoln? We cover these nearby towns too: