Splashbacks and tiling in Frome

Why splashbacks and tiling for a Frome home?

If your Frome home is an older property with uneven walls, the splashback may start with patching, skimming or boarding so the tiler has a flat surface to work from.

Homeowners in Frome often add a splashback as the final stage of a new kitchen, once the worktops are in and the bare wall above them needs a washable finish. We work throughout Frome (BA11) and across the wider Somerset area.

What is in a typical job?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Old tiles removed and walls prepared, patched or boarded where needed
Socket and switch plates refitted by an electrician once the tiling is finished
Full-height or feature tiling behind the hob, sink or open shelving
Free survey visit to check the walls, agree the layout and give an itemised quote

Splashbacks and tiling prices in Frome

Use these ranges to plan your budget. They include VAT, reflect costs in the South West, and are firmed up once we have seen your Frome kitchen. Costs in the South West sit close to the national guide.

Splashbacks and tiling prices in Frome
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£150–£410
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£310–£820
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£260–£620
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Kitchens in homes around Frome

You will find Georgian townhouses, Victorian terraces, stone cottages and post-war estate houses throughout Somerset. Georgian townhouses in Bath often have kitchens at lower-ground level or in flats on upper floors, while Victorian terraces in Taunton and Yeovil tend to have a narrow back galley.

Steep streets and controlled parking in Bath, upper-floor flats without lifts and narrow village lanes can each make delivering worktops slower. Somerset's mains water is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help keep them working well.

Building regulations, electrics and gas in Frome

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Bath is a World Heritage city with many listed buildings, and homes in Exmoor National Park or conservation areas may need consent for new vents or internal changes.

Tips before you start

Give fresh grout and sealant the full curing time shown on the packaging before scrubbing them or letting water sit on the joint at the back of the worktop.
If you are renting out a flat in Frome, a single glass panel or large plain tiles cut down the grout that needs cleaning at each check-out.
Ask to see where the tiling will start before the first row goes on in your Frome kitchen, so narrow cut tiles end up in corners rather than on show.
Toughened glass cannot be cut once it is made, so it is measured after the worktops are fixed and every socket position is final.

Questions about splashbacks and tiling in Frome

How much do splashbacks and tiling cost in Frome?

Splashbacks and tiling in Frome typically cost £150 to £410 including VAT for a tiled splashback, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Frome?

Yes. We work across Frome, including the BA11 postcode district, and nearby towns such as Warminster and Trowbridge. Book a free survey visit and we will arrange a time that suits you.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Can you tile over existing kitchen tiles?

Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Also covering nearby towns

Neighbouring towns where we offer splashbacks and tiling: