Splashbacks and tiling in Warminster

When do splashbacks and tiling make sense in Warminster?

Landlords around Wiltshire often prefer plain tiles with mid-grey grout or a glass panel, since both stand up to heavy use and are quick to clean between tenancies.

Some households in Wiltshire want tiling taken up to the ceiling behind a range cooker or open shelving, turning one whole wall into a practical feature that is easy to wipe down. Warminster sits about 30 miles south-west of Swindon, and our Wiltshire coverage takes in everything in between.

What does the job involve?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Old tiles removed and walls prepared, patched or boarded where needed
Socket and switch plates refitted by an electrician once the tiling is finished
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Tiled splashbacks between the worktop and wall units, set out from a centre line
Free survey visit to check the walls, agree the layout and give an itemised quote
Full-height or feature tiling behind the hob, sink or open shelving

What do splashbacks and tiling cost in Warminster?

The figures below are guide prices for Warminster, including VAT and adjusted for typical costs across the South West. The fixed price comes after we have measured up. Costs in the South West sit close to the national guide.

What do splashbacks and tiling cost in Warminster?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£150–£410
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£310–£820
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£260–£620
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

What kind of kitchens do we fit in Warminster?

You will find thatched and stone cottages, Victorian railway terraces, post-war estate houses and new-build estates throughout Wiltshire. Railway terraces in Swindon often have a narrow back kitchen, while stone and thatched cottages in the villages tend to have small kitchens with low ceilings.

Village lanes and farm tracks can be narrow for delivery lorries, and Salisbury's historic centre has limited parking, so delivery is planned in advance. Wiltshire's water is hard, much of it from chalk, so limescale on taps and boiling water taps is common and a filter can help.

What rules apply to splashbacks and tiling in Warminster?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Listed thatched cottages, Salisbury's historic centre and other conservation areas may need consent for a new external vent or changes to historic features.

Worth knowing before the fit

Choosing stone worktops for a Warminster kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
Ask to see where the tiling will start before the first row goes on in your Warminster kitchen, so narrow cut tiles end up in corners rather than on show.
Clear the worktop and empty the nearest wall cupboards before the tiler arrives at your Warminster home, as cutting dust and adhesive travel further than you expect.
Heavy tiles, such as large porcelain or natural stone, may need a stronger backing board and a suitable adhesive, so have the wall checked first.

Questions about splashbacks and tiling in Warminster

How much do splashbacks and tiling cost in Warminster?

For a tiled splashback, budget around £150 to £410 including VAT in Warminster. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.

Which parts of Warminster do you work in?

All of them. Our Wiltshire coverage takes in the whole of Warminster, including the BA12 postcode district, as well as surrounding towns such as Frome. If you are unsure, send us your postcode.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Also covering nearby towns

Neighbouring towns where we offer splashbacks and tiling: