Kitchen installation in Crewe

Is kitchen installation right for your Crewe kitchen?

If the kitchen in your Crewe home is twenty years old, with tired doors and worn worktops, a full installation renews everything in one planned job.

If you have bought a kitchen online or from a trade counter for your Crewe home, we can check the delivery against the plan and fit it properly. Crewe sits about 21 miles south of Warrington, and our Cheshire coverage takes in everything in between.

What does kitchen installation in Crewe include?

Your written quote lists everything included. For kitchen installation, that normally means:

Free survey visit, measurements and an itemised written quote
Removal and disposal of the old kitchen, with gas and electrics made safe
Sink, tap and integrated appliances fitted and connected
Worktops cut, jointed and sealed, or templated for stone
Gas hobs connected only by Gas Safe registered engineers
Base, wall and tall units fixed, levelled and secured to the wall

Guide prices for kitchen installation in Crewe

The figures below are guide prices for Crewe, including VAT and adjusted for typical costs across the North West. The fixed price comes after we have measured up. Labour rates in the North West are generally lower than in London and the South East, so these ranges are a little below the national guide.

Guide prices for kitchen installation in Crewe
Typical project	Guide price
Small kitchen, 5–10 units, fit onlyYour units fitted, laminate worktop, sink and appliance connections	£1,400–£2,400
Medium kitchen, 10–15 units, fit onlyAs above, for a typical family kitchen	£2,400–£3,300
Large kitchen, 15+ units or an island, fit onlyTall larders, island, more cut-outs and panels	£3,300–£4,300
Mid-range kitchen, supplied and fittedRigid units, quartz or solid wood worktops, integrated appliances, fitting and the usual trades	£17,100–£33,000

Fit-only guide ranges cover labour for units, laminate worktops and standard connections; stone worktops, new circuits, moved services, tiling, flooring and plastering are priced as separate lines. Prices include VAT at 20%.

House types around Crewe and what they mean for a kitchen

In and around Crewe, homes range across Victorian terraces, 1930s semis, new-build estates and period farmhouses and cottages. Terraces in towns such as Crewe and Warrington often have a back-addition galley, while 1930s semis usually have a small kitchen that can be opened into a dining room.

Hardness varies across Cheshire, from fairly soft in some places to moderately hard in others, so check with your supplier before choosing a filter or boiling water tap. Rural lanes and long farm drives can be awkward for delivery vans, and terraced streets in older town centres may have limited parking close to the door.

What rules apply to kitchen installation in Crewe?

Fitting a new kitchen does not need planning permission in England. Listed building consent may be needed if the building is listed, and a new vent through the outside wall of a flat may need planning permission and the freeholder's consent. Electrical work must meet BS 7671, and new circuits or a new consumer unit are notifiable under Part P, so they are certified through a competent person scheme or building control. New extraction should be designed to Approved Document F rates (about 30 litres per second for a hood ducted outside), a refit should not leave ventilation worse than before, and only Gas Safe registered engineers may connect a gas hob.

Listed timber-framed buildings, homes in conservation areas such as central Chester and the Cheshire fringe of the Peak District National Park may need consent for new vents.

Planning ahead

Ask for appliance sizes and ventilation gaps to be checked against the housings before you buy appliances for a Crewe kitchen.
Order stone worktops early in the plan, as templating can only happen once the base units are fixed.
Keep the delivery note and plan together until the fit, so any missing parts can be reported to the supplier quickly.
If the house was built before 2000, consider an asbestos survey before strip-out, especially with textured ceilings or old floor tiles.

Questions about kitchen installation in Crewe

How much does kitchen installation cost in Crewe?

For a small kitchen of 5 to 10 units, fit only, budget around £1,400 to £2,400 including VAT in Crewe. That reflects typical costs in the North West; we confirm the actual figure in writing once we have measured up.

Can you measure up in Crewe before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Crewe. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Can I use my kitchen during the installation?

Not for most of it. Once the old kitchen comes out there is no sink or cooker until the new one is connected, usually a week or two for an average kitchen. We plan the job so the water and power are off for as little time as possible, and we tell you which days will be the most disruptive.

Do I need building regulations approval for a new kitchen?

Usually only for parts of the job. Fitting units does not need approval, but new electrical circuits are notifiable in England and Wales, removing a load-bearing wall needs approval everywhere, and in Scotland structural work needs a building warrant. Gas work must always be done by a Gas Safe registered engineer.

What order does a kitchen installation follow?

The usual sequence is strip-out, any structural work, first-fix electrics and plumbing, plastering, base and wall units, worktops, second fix of sockets, sink, tap and appliances, then splashbacks, flooring and decorating. Some floors go down before the units and some after, depending on the floor type, which we agree at the survey.

Also covering nearby towns

Neighbouring towns where we offer kitchen installation: