Splashbacks and tiling · England
Splashbacks and tiling in Bedfordshire
Homeowners and landlords across Bedfordshire can book us for splashbacks and tiling: tiled, glass and stone splashbacks and wall tiling, fitted once the worktops and sockets are in.
When do splashbacks and tiling make sense in Bedfordshire?
If the units in your Bedfordshire kitchen are already fitted and only the walls are unfinished, we can take on the tiling or splashback as a job on its own.
If the kitchen in your Bedfordshire home is sound but the tiles are dated, cracked or stained, a new splashback is one of the simplest ways to refresh it without replacing units.
What do splashbacks and tiling in Bedfordshire include?
The exact scope is agreed after the survey, but a typical job in Bedfordshire covers:
- Free survey visit to check the walls, agree the layout and give an itemised quote
- Old tiles removed and walls prepared, patched or boarded where needed
- Tiled splashbacks between the worktop and wall units, set out from a centre line
- Full-height or feature tiling behind the hob, sink or open shelving
- Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
- Stone upstands and splashbacks templated and fitted alongside a stone worktop
- Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
- Socket and switch plates refitted by an electrician once the tiling is finished
How much do splashbacks and tiling cost in Bedfordshire?
These guide ranges include VAT at 20% and are adjusted for prices in the East of England. We confirm your price in writing after a free survey visit. Expect costs in the East of England to sit somewhat above UK averages, reflecting local labour rates.
| Typical project | Guide price |
|---|---|
| Tiled splashbackBetween worktop and wall units | £160–£430 |
| Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting | £320–£860 |
| Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in | £270–£650 |
| Stone upstands and splashbacksTemplated with the worktop | Priced with the worktop |
Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.
Kitchens in homes across Bedfordshire
You will find Victorian terraces, 1930s semis, post-war council-built houses and new-build estates throughout Bedfordshire. Terraced houses here often have a narrow galley or back-addition kitchen, while interwar semis tend to have a small square kitchen at the rear.
Water across most of Bedfordshire is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering. Town-centre terraces can have tight on-street parking, so it helps to plan where a van unloads and how long worktops will pass through a narrow hallway.
Many older terraces here have a separate back kitchen, and some owners open it into the dining room to make one larger space. If your home is on a newer estate, the job is more often a straight replacement of a builder-grade kitchen, with extra sockets and a better worktop.
Rules for splashbacks and tiling in Bedfordshire
Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.
Fitting a kitchen needs no planning permission, but listed cottages in the older market towns may need listed building consent for changes such as a new vent through a historic wall.
Before you start
- Choosing stone worktops? Decide on upstands or a full-height splashback before templating, so they can be cut from the same material and priced together.
- Heavy tiles, such as large porcelain or natural stone, may need a stronger backing board and a suitable adhesive, so have the wall checked first.
- Agree socket, switch and cooker hood positions before tiling starts; moving them afterwards means cutting tiles out and patching in replacements that may not match.
- Pale grout behind a hob or sink shows stains quickly; a mid-grey or stain-resistant grout in narrow joints is easier to keep looking fresh.
- If your Bedfordshire kitchen has a gas hob, check the hob instructions for splashback clearances before choosing glass or tiles for the wall behind it.
- If you are renting out a flat in Bedfordshire, a single glass panel or large plain tiles cut down the grout that needs cleaning at each check-out.
Questions about splashbacks and tiling in Bedfordshire
How much do splashbacks and tiling cost in Bedfordshire?
For a tiled splashback, budget around £160 to £430 including VAT in Bedfordshire. That reflects typical costs in the East of England; we confirm the actual figure in writing once we have measured up.
Do you cover the whole of Bedfordshire?
Yes. We carry out splashbacks and tiling across Bedfordshire, including Luton, Bedford, Dunstable and Leighton Buzzard. Every job starts with a free survey visit and an itemised written quote.
Which grout and sealant are easiest to keep clean?
A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.
Can you tile over existing kitchen tiles?
Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.
Can a glass splashback go behind a gas hob?
Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.
Splashbacks and tiling in towns across Bedfordshire
Choose a town for local guide prices and postcode coverage:
- Splashbacks and tiling in Luton
- Splashbacks and tiling in Bedford
- Splashbacks and tiling in Dunstable
- Splashbacks and tiling in Leighton Buzzard
- Splashbacks and tiling in Ampthill
- Splashbacks and tiling in Kempston
- Splashbacks and tiling in Biggleswade
- Splashbacks and tiling in Sandy