Splashbacks and tiling in Luton

Why do people in Luton choose splashbacks and tiling?

If your Luton home is an older property with uneven walls, the splashback may start with patching, skimming or boarding so the tiler has a flat surface to work from.

If the units in your Luton kitchen are already fitted and only the walls are unfinished, we can take on the tiling or splashback as a job on its own. Kitchens in every part of Luton are covered, and the survey visit is free wherever you are in Bedfordshire.

What is included in the work?

Here is what usually goes into splashbacks and tiling, adjusted to your Luton kitchen after we have measured it:

Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Full-height or feature tiling behind the hob, sink or open shelving
Old tiles removed and walls prepared, patched or boarded where needed
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Free survey visit to check the walls, agree the layout and give an itemised quote
Tiled splashbacks between the worktop and wall units, set out from a centre line

Guide prices for splashbacks and tiling in Luton

Use these ranges to plan your budget. They include VAT, reflect costs in the East of England, and are firmed up once we have seen your Luton kitchen. Expect costs in the East of England to sit somewhat above UK averages, reflecting local labour rates.

Guide prices for splashbacks and tiling in Luton
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£160–£430
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£320–£860
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£270–£650
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

What kind of kitchens do we fit in Luton?

The housing mix across Bedfordshire includes Victorian terraces, 1930s semis, post-war council-built houses and new-build estates, so no two kitchen fits are quite alike. Terraced houses here often have a narrow galley or back-addition kitchen, while interwar semis tend to have a small square kitchen at the rear.

Water across most of Bedfordshire is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering. Town-centre terraces can have tight on-street parking, so it helps to plan where a van unloads and how long worktops will pass through a narrow hallway.

What rules apply to splashbacks and tiling in Luton?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Fitting a kitchen needs no planning permission, but listed cottages in the older market towns may need listed building consent for changes such as a new vent through a historic wall.

Practical advice for Luton homeowners

Keep the tile boxes until the job is finished and note the batch number, so matching replacements can be found if a tile cracks later.
Ask to see where the tiling will start before the first row goes on in your Luton kitchen, so narrow cut tiles end up in corners rather than on show.
If you are renting out a flat in Luton, a single glass panel or large plain tiles cut down the grout that needs cleaning at each check-out.
Agree socket, switch and cooker hood positions before tiling starts; moving them afterwards means cutting tiles out and patching in replacements that may not match.

Questions about splashbacks and tiling in Luton

How much do splashbacks and tiling cost in Luton?

For a tiled splashback, budget around £160 to £430 including VAT in Luton. That reflects typical costs in the East of England; we confirm the actual figure in writing once we have measured up.

Which parts of Luton do you work in?

All of them. Our Bedfordshire coverage takes in the whole of Luton, including the LU1 postcode district, as well as surrounding towns such as Dunstable. If you are unsure, send us your postcode.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Splashbacks and tiling in neighbouring towns

Neighbouring towns where we offer splashbacks and tiling: