Splashbacks and tiling in Ashbourne

Who usually needs splashbacks and tiling in Ashbourne?

Some households in Derbyshire want tiling taken up to the ceiling behind a range cooker or open shelving, turning one whole wall into a practical feature that is easy to wipe down.

If your Ashbourne home is an older property with uneven walls, the splashback may start with patching, skimming or boarding so the tiler has a flat surface to work from. If your home is in Ashbourne or close by in Belper or Matlock, the same survey, quote and fitting process applies.

What is included in the work?

The exact scope is agreed after the survey, but a typical job in Ashbourne covers:

Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Full-height or feature tiling behind the hob, sink or open shelving
Old tiles removed and walls prepared, patched or boarded where needed
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Tiled splashbacks between the worktop and wall units, set out from a centre line
Socket and switch plates refitted by an electrician once the tiling is finished

What do splashbacks and tiling cost in Ashbourne?

Use these ranges to plan your budget. They include VAT, reflect costs in the East Midlands, and are firmed up once we have seen your Ashbourne kitchen. Costs in the East Midlands sit close to the national guide.

What do splashbacks and tiling cost in Ashbourne?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£150–£390
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£290–£780
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£240–£580
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Local homes and their kitchens

Typical homes in this part of Derbyshire include gritstone and limestone cottages, Victorian terraces, 1930s semis and former mining village terraces. Terraces in Derby and Chesterfield often have a long galley behind the back room, while stone cottages in the Peak District may have a small kitchen in a rear extension.

Water hardness varies across Derbyshire, so check with your supplier; where it is harder, limescale on taps and boiling water taps is worth planning for. Steep hill villages and narrow lanes can limit delivery vehicles, while terraced streets in the towns may have little parking near the front door.

What rules apply to splashbacks and tiling in Ashbourne?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Homes in the Peak District National Park, listed buildings and conservation areas may need consent for a new vent on a visible wall or alterations to historic features.

Getting the most from your splashbacks and tiling

Keep the tile boxes until the job is finished and note the batch number, so matching replacements can be found if a tile cracks later.
Choosing stone worktops for an Ashbourne kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
If your Derbyshire kitchen has a gas hob, check the hob instructions for splashback clearances before choosing glass or tiles for the wall behind it.
Toughened glass cannot be cut once it is made, so it is measured after the worktops are fixed and every socket position is final.

Questions about splashbacks and tiling in Ashbourne

How much do splashbacks and tiling cost in Ashbourne?

Splashbacks and tiling in Ashbourne typically cost £150 to £390 including VAT for a tiled splashback, based on prices in the East Midlands. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Ashbourne as well?

Yes. As well as Ashbourne itself, we cover the rest of Derbyshire and nearby towns such as Belper and Matlock. The process is the same wherever the kitchen is.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Can you tile over existing kitchen tiles?

Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Splashbacks and tiling near Ashbourne

We also carry out splashbacks and tiling in these towns near Ashbourne: