Splashbacks and tiling in Derby

Is splashbacks and tiling right for your Derby kitchen?

Landlords around Derbyshire often prefer plain tiles with mid-grey grout or a glass panel, since both stand up to heavy use and are quick to clean between tenancies.

Homeowners in Derby often add a splashback as the final stage of a new kitchen, once the worktops are in and the bare wall above them needs a washable finish. Homes right across Derby are covered, as are nearby places such as Belper, Ilkeston and the villages in between.

What is in a typical job?

After the survey visit we write the scope down. For splashbacks and tiling in Derby it usually covers:

Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Full-height or feature tiling behind the hob, sink or open shelving
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Socket and switch plates refitted by an electrician once the tiling is finished
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Free survey visit to check the walls, agree the layout and give an itemised quote

What should you budget for splashbacks and tiling in Derby?

The figures below are guide prices for Derby, including VAT and adjusted for typical costs across the East Midlands. The fixed price comes after we have measured up. Costs in the East Midlands sit close to the national guide.

What should you budget for splashbacks and tiling in Derby?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£150–£390
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£290–£780
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£240–£580
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

House types around Derby and what they mean for a kitchen

Typical homes in this part of Derbyshire include gritstone and limestone cottages, Victorian terraces, 1930s semis and former mining village terraces. Terraces in Derby and Chesterfield often have a long galley behind the back room, while stone cottages in the Peak District may have a small kitchen in a rear extension.

Water hardness varies across Derbyshire, so check with your supplier; where it is harder, limescale on taps and boiling water taps is worth planning for. Steep hill villages and narrow lanes can limit delivery vehicles, while terraced streets in the towns may have little parking near the front door.

Do you need approval for splashbacks and tiling in Derby?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Homes in the Peak District National Park, listed buildings and conservation areas may need consent for a new vent on a visible wall or alterations to historic features.

Practical advice for Derby homeowners

If your Derbyshire kitchen has a gas hob, check the hob instructions for splashback clearances before choosing glass or tiles for the wall behind it.
Choosing stone worktops for a Derby kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
Give fresh grout and sealant the full curing time shown on the packaging before scrubbing them or letting water sit on the joint at the back of the worktop.
Order spare tiles from the same batch to cover cuts and breakages, and keep a few back so a later repair matches.

Questions about splashbacks and tiling in Derby

How much do splashbacks and tiling cost in Derby?

Splashbacks and tiling in Derby typically cost £150 to £390 including VAT for a tiled splashback, based on prices in the East Midlands. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Derby?

Yes. We work across Derby, including the DE1 postcode district, and nearby towns such as Belper and Ilkeston. Book a free survey visit and we will arrange a time that suits you.

Can you tile over existing kitchen tiles?

Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Also covering nearby towns

Close to Derby? We cover these nearby towns too: