Sink and tap installation in Swindon

Who usually needs sink and tap installation in Swindon?

Homeowners across Wiltshire adding a boiling water tap often need a socket or spur in the sink cupboard, a filter and space for the tank planned in.

If a new dishwasher or washing machine is going next to the sink in your Swindon home, the trap and waste connections usually need changing as well. We cover all of Swindon, including the SN1, SN25 and SN26 postcode districts, and travel out to neighbouring towns across Wiltshire.

What we cover for sink and tap installation in Swindon

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
Sink moved to a new position with new supply and waste runs
Isolation valves on the hot and cold supplies, with flexible tap tails connected
Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
Boiling water tap fitted with its tank, filter and power supply in the cupboard
Every joint leak tested, with water flow and drainage checked before handover

Sink and tap installation prices in Swindon

These guide ranges include VAT at 20% and are adjusted for prices in the South West. We confirm your price in writing after a free survey visit. Prices across the South West are broadly in line with UK averages.

Sink and tap installation prices in Swindon
Typical project	Guide price
Sink and tap plumbed inIsolation valves, waste and trap	£210–£410
Boiling water tap installedTank under the sink, filter and power supply	£150–£360
Sink moved to a new positionNew supplies and waste run	£410–£1,000
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator	Priced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

Kitchens in homes around Swindon

In and around Swindon, homes range across thatched and stone cottages, Victorian railway terraces, post-war estate houses and new-build estates. Railway terraces in Swindon often have a narrow back kitchen, while stone and thatched cottages in the villages tend to have small kitchens with low ceilings.

Wiltshire's water is hard, much of it from chalk, so limescale on taps and boiling water taps is common and a filter can help. Village lanes and farm tracks can be narrow for delivery lorries, and Salisbury's historic centre has limited parking, so delivery is planned in advance.

Building regulations, electrics and gas in Swindon

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Listed thatched cottages, Salisbury's historic centre and other conservation areas may need consent for a new external vent or changes to historic features.

Practical advice for Swindon homeowners

Ask whether a boiling water tap for your kitchen in Wiltshire needs a filter, how often it should be changed and where it will sit in the cupboard.
Choose the sink before stone worktops are templated in your Swindon kitchen, so the fabricator can cut and polish the undermount opening to suit it.
Check the tap's hole size against the sink or worktop before ordering, as some taps need a larger hole than an existing sink provides.
Ceramic farmhouse-style sinks are heavy and need a base unit designed to carry them, with the worktop planned around the sink.

Questions about sink and tap installation in Swindon

How much does sink and tap installation cost in Swindon?

Sink and tap installation in Swindon typically costs £210 to £410 including VAT for plumbing in a new sink and tap, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Swindon do you work in?

All of them. Our Wiltshire coverage takes in the whole of Swindon, including the SN1, SN25 and SN26 postcode districts, as well as surrounding towns such as Marlborough. If you are unsure, send us your postcode.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

Do I need isolation valves under my kitchen sink?

They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.

Can a dishwasher and washing machine drain through the sink waste?

Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.

Nearby places we cover

The same service is available a short drive from Swindon, including: